ID.4 2021 ➤
Running gear, axles, steering - Edition 05.2021
8
Anti-roll bar
8.1
Assembly overview – anti-roll bar
1 - Nut
❑ M14 × 1.5
❑ 160 Nm
2 - Suspension strut
❑ ⇒ Rep. gr. 40; Assem‐
bly overview – suspen‐
sion strut
❑ ⇒ Rep. gr. 40; Remov‐
ing and installing sus‐
pension strut
3 - Coupling rod
❑ ⇒ Rep. gr. 40; Remov‐
ing and installing cou‐
pling rod
4 - Bolt
❑ Qty. 4
❑ Renew after removing
❑ M 10 x 75
❑ 20 Nm +180°
5 - Subframe
❑ ⇒ Rep. gr. 40; As‐
sembly overview – sub‐
frame
❑ ⇒ Rep. gr. 40; Re‐
moving and installing
subframe with steering
rack
❑ ⇒ Rep. gr. 40; Fixing
subframe in position
6 - Anti-roll bar
❑ ⇒ Rep. gr. 40; Remov‐
ing and installing anti-
roll bar
7 - Bonded rubber bush
❑ Part of anti-roll bar
8.2
Removing and installing anti-roll bar
Removing
Removal and installation are described for the left side of vehi‐
cle as an example.
– ⇒ Rep. gr. 44; Remove wheel.
– Remove underbody cladding at front ⇒ General body re‐
pairs, exterior; Rep. gr. 66; Underbody cladding; Removing
and installing underbody cladding.
8. Anti-roll bar
85
2024 VW ID.4 Owner's Manual
