Table of Contents
- Engine list
- Service work
- Information on fixed service
- Service tables
- General information
- General warnings for working on high-voltage system
- Raising vehicle with lifting platform or trolley jack
- Entries in service schedule
- Severe operating conditions
- Vehicle data sticker
- Connecting vehicle diagnostic tester
- Countries with hot climate
- Engine code and engine number
- Countries with high levels of dust
- Identification plate
- Descriptions of work
- Swivel joints, axle mountings, coupling rod bearings and anti-roll bar rubber mounting: inspecting for damage
- Privacy notice sticker: attaching
- Automatic headlight control and static cornering light: checking function
- Battery (12V): checking battery terminal clamps for secure seating
- Battery (12V): checking
- Status of battery (12V): reading - sending diagnosis protocol via online connection
- Front passenger front airbag: checking key switch and “ON/OFF function”
- Tyres: checking condition, wear pattern, tyre pressure and tread depth
- Brake system: changing brake fluid
- Brake system and shock absorbers: inspecting for leaks and damage
- Brake fluid level: checking
- Front brake discs and rear drum brake pads: checking thickness of pads and condition of discs
- Electric windows: checking positioning (open and close functions)
- Fault memory of all systems: reading with vehicle diagnostic tester, correcting possible faults according to repair guidelines
- Boots: inspecting
- Interior filter: cleaning housing and renewing filter element
- High-voltage battery: checking charge level
- Maintenance of high-voltage battery
- High-voltage battery: charging
- High voltage components and high-voltage cables: inspecting for damage and correct routing and securing of lines
- Infotainment system: installing digital manual
- Interior and exterior body: inspecting for corrosion with doors and flaps open
- Cooling system: checking frost protection and coolant level
- Air conditioning system with heat pump: renewing refrigerant R744 (CO2)
- Charging cable bag: securing in luggage compartment
- Engine and components in engine compartment: inspecting for leaks and damage (from above and below)
- Motor compartment cover (noise insulation) “bottom”: removing and installing
- Road test: performing (driving behaviour, noises, air conditioner etc.)
- Wheel securing bolts: tightening to specified torque
- Tyre Pressure Loss Indicator: calibrating
- Tyre repair set: checking
- Window wash/wipe system and headlight washer system: checking function
- Headlight adjustment: checking LED headlights
- Headlight adjustment: checking matrix LED headlights
- Service work for vehicle handover: carrying out with vehicle diagnostic tester
- Service interval display: resetting
- Track rods: checking clearance, attachment, and boots
- Transportation devices: removing blocking pieces
- Clock and date: setting
- Underbody: inspecting for damage to underbody sealant, underbody panels, routing of lines, plugs
- Warning sticker ID.4: checking