ID.4 2021 ➤
Running gear, axles, steering - Edition 05.2021
❑ ⇒ Rep. gr. 43; Removing and installing rear vehicle level senders [G76]/[G77]
11 - Shock absorber with rear right shock absorber damper adjustment valve -N339-.
❑ ⇒ Rep. gr. 42; Assembly overview – shock absorber
❑ ⇒ Rep. gr. 42; Removing and installing shock absorber
2.2
Assembly overview – electronically controlled damping control unit [J250]
1 - Bracket
❑ for electronically con‐
trolled damping control
unit -J250-
2 - Removing and instal‐
ling electronically controlled
damping control unit -J250-
❑ ⇒ Rep. gr. 43; Re‐
moving and installing
electronically controlled
damping control unit -
J250-
3 - Nut
❑ 2.5 Nm
4 - Electrical connector
5 - Bracket
2.3
Removing and installing electronically
controlled damping control unit [J250]
Removing
The electronically controlled damping control unit -J250- will
henceforth be referred to as “control unit”.
– If the control unit is renewed, perform the test plan for the
renewal of the control unit using ⇒ Vehicle diagnostic tester.
– Remove right luggage compartment side trim ⇒ General
body repairs, interior; Rep. gr. 70; Luggage compartment
trims; Removing and installing luggage compartment side
trim.
2. Electronically controlled damping
205
2024 VW ID.4 Owner's Manual
