ID.4 2021 ➤
Running gear, axles, steering - Edition 05.2021
– Unscrew bolt -4-, and remove rear body acceleration sender
-1-.
Installing
Install in reverse order of removal, observing the following:
– Insert guide on rear body acceleration sender -1- into recess
in body -arrow-.
– Carry out basic setting for wheel damper electronics using
⇒ Vehicle diagnostic tester.
Tightening torques
♦ ⇒ Rep. gr. 43; Assembly overview – electronically controlled
damping
2.6
Assembly overview - electronically controlled damping
The overview is shown for the left side of vehicle as an exam‐
ple.
208
Rep. gr.43 - Self-levelling suspension
ID.4 2021 ➤
Running gear, axles, steering - Edition 05.2021
1 - Front left body accelera‐
tion sender -G341-/front right
body acceleration sender -
G342-
❑ ⇒ Rep. gr. 43; Re‐
moving and installing
front body acceleration
sender
2 - Bracket
3 - Electrical connector
4 - Bolt
❑ M6 × 16
❑ 8 Nm
5 - Rear body acceleration
sender -G343-
❑ ⇒ Rep. gr. 43; Re‐
moving and installing
rear body acceleration
sender -G343-
6 - Pop rivet nut
7 - Electrical connector
8 - Bolt
❑ M6 × 25
❑ 8 Nm
2. Electronically controlled damping
209
2024 VW ID.4 Owner's Manual
