ID.4 2021 ➤
Running gear, axles, steering - Edition 05.2021
1 - Spring
❑ Depending on equip‐
ment/version
❑ For allocation, refer to
⇒ Electronic parts cata‐
logue “ETKA”
❑ ⇒ Rep. gr. 42; Remov‐
ing and installing spring
2 - Spring seat
3 - Support
4 - Spring seat
5 - Spring control arm
❑ ⇒ Rep. gr. 42; Assem‐
bly overview – spring
control arm
❑ ⇒ Rep. gr. 42; Remov‐
ing and installing spring
control arm
6 - Retaining clip
7 - Guides
6.4
Assembly overview – shock absorber
The overview is shown for the left side of vehicle as an exam‐
ple.
6. Suspension strut, shock absorber, spring
167
ID.4 2021 ➤
Running gear, axles, steering - Edition 05.2021
1 - Shock absorber
❑ ⇒ Rep. gr. 42; Remov‐
ing and installing shock
absorber
2 - Bolt
❑ qty. 2
❑ Renew after removing
❑ M 10 × 35
❑ 50 Nm +90°
3 - Cover
4 - Nut
❑ Renew after removing
❑ M 10
❑ 25 Nm
5 - Shock absorber mounting
6 - Stop buffer
7 - Cable tie
❑ Renew after removing
8 - Protective tube
9 - Nut
❑ Renew after removing
❑ M 12 × 1.5
❑ 70 Nm +180°
10 - Bolt
❑ Renew after removing
❑ M12 × 1.5 × 90
6.5
Removing and installing spring
Special tools and workshop equipment required
♦ engine and gearbox jack -VAS 6931-
♦ gearbox support -T10337-
Removing
Removal and installation are described for the left side of vehi‐
cle as an example.
The rear left vehicle level sender -G76- will henceforth be refer‐
red to as “rear left vehicle level sender”.
– ⇒ Rep. gr. 44; Remove wheel.
– Remove stone deflector for spring control arm ⇒ Rep. gr. 42;
Removing and installing stone deflector for spring control
arm.
– ⇒ Rep. gr. 42; Secure vehicle to support arms of lifting plat‐
form.
168
Rep. gr.42 - Rear suspension
2024 VW ID.4 Owner's Manual
