Table of Contents > Steering > 2 Steering wheel > 2.1 Assembly overview – steering wheel

VW ID.4 Running Gear, Axles, Steering ➜ 2.1 Assembly overview – steering wheel

ID.4 2021 ➤  
Running gear, axles, steering - Edition 05.2021  
2
Steering wheel  
2.1  
Assembly overview – steering wheel  
1 - Steering wheel  
❑ ⇒ Rep. gr. 48; Remov‐  
ing and installing steer‐  
ing wheel  
2 - Bolt  
❑ Renew after removing  
❑ 30 Nm +90°  
3 - Electrical connector  
4 - Steering column  
❑ ⇒ Rep. gr. 48; Assem‐  
bly overview – steering  
column  
❑ ⇒ Rep. gr. 48; Remov‐  
ing and installing steer‐  
ing column  
2.2  
Removing and installing steering wheel  
Removing  
– Move steering column to middle height position.  
– Disconnect battery ⇒ Electrical system; Rep. gr. 27; Battery;  
Disconnecting and connecting battery.  
– Remove airbag unit with igniter ⇒ General body repairs, in‐  
terior; Rep. gr. 69; Driver airbag; Removing and installing  
airbag unit with igniter.  
– Move wheels to straight-ahead position. The steering wheel  
must be removed/installed in the centre position.  
– Disconnect electrical connector -5-.  
2. Steering wheel  
227  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!