ID.4 2021 ➤
Running gear, axles, steering - Edition 05.2021
6
Wheel bearing
6.1
Assembly overview – wheel bearing
assembly
6.1.1
Assembly overview – wheel bearing assembly, vehicles with rear-wheel
drive
1 - Bush
❑ Ensure firm seating
2 - Bolt
❑ qty. 3
❑ Renew after removing
❑ M12 × 1.5 × 45
❑ 70 Nm +90°
3 - Plate
4 - Wheel bearing housing
❑ ⇒ Rep. gr. 40; Remov‐
ing and installing wheel
bearing housing
5 - Wheel bearing unit
❑ ⇒ Rep. gr. 40; Remov‐
ing and installing wheel
bearing unit
6 - Bolt
❑ Renew after removing
❑ M16 × 1.5 × 70
❑ 200 Nm +90°
7 - Bush
❑ Ensure firm seating
6.1.2
Assembly overview – wheel bearing assembly, vehicles with all-wheel
drive
58
Rep. gr.40 - Front suspension
ID.4 2021 ➤
Running gear, axles, steering - Edition 05.2021
1 - Bush
❑ Ensure firm seating
2 - Bolt
❑ qty. 4
❑ Renew after removing
❑ M12 × 1.5 × 45
❑ 70 Nm +90°
3 - Wheel bearing housing
❑ ⇒ Rep. gr. 40; Remov‐
ing and installing wheel
bearing housing
4 - Wheel bearing unit
❑ ⇒ Rep. gr. 40; Remov‐
ing and installing wheel
bearing unit
5 - Bolt
❑ Renew after removing
❑ M16 × 1.5 × 70
❑ 200 Nm +90°
6 - Bush
❑ Ensure firm seating
7 - Bush
❑ Ensure firm seating
6.2
Removing and installing wheel bearing
housing
Special tools and workshop equipment required
♦ ball joint puller -3287A-
♦ spreading device -VAS 751 003-
Removing
The front left speed sensor -G47- and front right speed sensor
-G45- will henceforth be referred to as “front speed sensor”.
The front left vehicle level sender -G78- and front right vehicle
level sender -G289- will henceforth be referred to as “front vehi‐
cle level sender”.
Removal and installation are described for the left side of vehi‐
cle as an example.
Vehicles with bolted wheel bearings
– Loosen outer threaded connection of wheel bearing ⇒ Rep.
gr. 40; Loosening and tightening threaded connections of
wheel bearings.
6. Wheel bearing
59
2024 VW ID.4 Owner's Manual
