Table of Contents > Front suspension > 3 Subframe > 3.7 Removing and installing subframe with electric motor

VW ID.4 Running Gear, Axles, Steering ➜ 3.7 Removing and installing subframe with electric motor

ID.4 2021 ➤  
Running gear, axles, steering - Edition 05.2021  
– Support bracket -10-222A--B-  
– Hook -10-222A/20--C-  
– Spindle from support bracket -10-222A--D-  
– Adapter -10-222A/18--E-  
– Adapter -10-222A/18--E-  
– Tensioning strap -T10523--G-  
3.7  
Removing and installing subframe with  
electric motor  
Removing  
The power steering control unit -J500- is installed in the steering  
rack.  
The steering rack and power steering control unit -J500- will  
henceforth be referred to as “steering rack”.  
3. Subframe  
19  
ID.4 2021 ➤  
Running gear, axles, steering - Edition 05.2021  
DANGER  
Danger of death from high voltage.  
Electric shocks or arcs can cause serious injuries or death.  
– Have the high-voltage system de-energised by a high-volt‐  
age technician (HVT) or high-voltage expert (HVE).  
– ⇒ ; Rep. gr. ; De-energising high-voltage system.  
– Underbody guard  
– Spoiler mount  
– Right and left wheel housing liners  
– Fan box  
– Heater [Z3]  
– Vehicle level sender on suspension link  
– Drain coolant  
– Unscrew bolts -3- from lock carrier -1-.  
Left-hand drive vehicles  
– Unscrew bolt -3-. Detach electrical wire -2-.  
– Disconnect electrical connector -4- on power and control  
electronics 2 for electric drive -JX4--1-.  
– Unclip electrical wire -arrows-.  
– Unclip coolant hose -2- -arrows-.  
20  
Rep. gr.40 - Front suspension  
ID.4 2021 ➤  
Running gear, axles, steering - Edition 05.2021  
– Unscrew bolts -2- and -4-.  
– Pull universal joint -1- off steering rack -5-.  
– Pull universal joint -1- off intermediate steering shaft -3-.  
Right-hand drive vehicles  
– Unscrew bolt -2-. Detach electrical wire -3-.  
– Disconnect electrical connector -5- on power and control  
electronics 2 for electric drive -JX4--1-.  
– Unclip electrical wire -3- from retainer -4- -arrows-.  
– Unclip coolant hose -2- -arrows-.  
3. Subframe  
21  
ID.4 2021 ➤  
Running gear, axles, steering - Edition 05.2021  
– Unscrew bolts -4- on cross member -3- for three-phase cur‐  
rent drive 2 -VX97--2-.  
– Remove bracket -1-.  
– Unscrew bolts -2- and -5-.  
– Pull universal joint -1- off steering rack -4-.  
– Pull universal joint -1- off intermediate steering shaft -3-.  
All vehicles (continued)  
– Pull gearbox breather line -2- off three-phase current drive 2  
-VX97--1-.  
22  
Rep. gr.40 - Front suspension  
ID.4 2021 ➤  
Running gear, axles, steering - Edition 05.2021  
– Open hose clip -arrow-.  
– Pull off coolant hose -2- at top of three-phase current drive 2  
-VX97--1-.  
– Unclip wiring retainer -2- from subframe -1-.  
– Unscrew bolts -4- for retainer -3- of high-voltage cable -2-.  
3. Subframe  
23  
ID.4 2021 ➤  
Running gear, axles, steering - Edition 05.2021  
– Push locking element -4- in direction of -arrow B-.  
– Open locking bracket -3- on high-voltage connector -2- in  
direction of -arrow A-, and pull off high-voltage connector -2-.  
– Unscrew rear cross piece bolt.  
24  
Rep. gr.40 - Front suspension  
ID.4 2021 ➤  
Running gear, axles, steering - Edition 05.2021  
– Unclip right brake line retainer.  
– Pull out inner pin -4-, and lever off retaining clip -3-.  
– Remove coolant pipe -2- at rear cross piece -1-.  
– Unscrew bolts -6- for brackets -1-, -2- and -3- from subframe  
-7-.  
3. Subframe  
25  
ID.4 2021 ➤  
Running gear, axles, steering - Edition 05.2021  
– Pull out inner pin, and lever off retaining clip -5-.  
– Move aside coolant pipe -4- on subframe -7-.  
– Open hose clip -3-.  
– Pull off coolant hose -2- at top of three-phase current drive 2  
-VX97--1-.  
– Open retainer -2- for coolant hose -3-.  
26  
Rep. gr.40 - Front suspension  
ID.4 2021 ➤  
Running gear, axles, steering - Edition 05.2021  
– Move aside coolant hose -3-.  
– Unscrew bolts -6- for brackets -1-, -2- and -3- from subframe  
-7-.  
– Pull out inner pin, and lever off retaining clip -5-.  
– Move aside coolant pipe -4- on subframe -7-.  
– Open hose clip -2-.  
– Pull coolant hose -3- at top off coolant pipe -4-.  
Left-hand drive vehicles  
– Disconnect electrical connectors -1- and -4- from steering  
rack -3-.  
– Unclip electrical wire from steering rack.  
Right-hand drive vehicles  
– Disconnect electrical connectors -2- and -3- from steering  
rack -1-.  
3. Subframe  
27  
ID.4 2021 ➤  
Running gear, axles, steering - Edition 05.2021  
– Unclip electrical wire from steering rack.  
All vehicles (continued)  
– Unscrew rear bolts from rear plates.  
Tightening torques  
♦ ⇒ Rep. gr. 40; Assembly overview – subframe  
♦ ⇒ Rep. gr. 40; Assembly overview – suspension link, swivel  
joint  
♦ ⇒ Rep. gr. 48; Assembly overview – steering rack  
♦ ⇒ General body repairs, exterior; Rep. gr. 50; Lock carrier;  
Assembly overview – lock carrier  
3.8  
Assembly overview – subframe  
3.8.1  
Assembly overview - subframe, rear-wheel drive  
28  
Rep. gr.40 - Front suspension  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!