VW ID.4 Service & Owner's Manuals
Table of Contents > Front suspension > 5 Lower suspension link, swivel joint > 5.7 Renewing front suspension link mounting

VW ID.4 Running Gear, Axles, Steering ➜ 5.7 Renewing front suspension link mounting

ID.4 2021 ➀  
Running gear, axles, steering - Edition 05.2021  
β€’
Dimension -a- = 15.6 mm  
– Press in rear suspension link mounting -4- as shown in illus‐  
tration.  
Important  
β€’
Bevelled edges of suspension link -5- point downwards  
when pressing in.  
1 - Press tool -VW412-  
2 - Thrust plate -VW447i-  
3 - Guide sleeve -3053-  
4 - Rear suspension link mounting  
5 - Suspension link  
6 - Tube -3345-  
7 - Thrust plate -VW401-  
– Install suspension link β‡’ Rep. gr. 40; Removing and instal‐  
ling suspension link.  
5.7  
Renewing front suspension link mount‐  
ing  
Special tools and workshop equipment required  
♦ Assembly tool -3348-  
♦ Press tool -VW412-  
♦ Thrust plate -VW401-  
♦ Tube -3345-  
Removing  
– Remove suspension link β‡’ Rep. gr. 40; Removing and in‐  
stalling suspension link.  
– Note allocation of suspension link mountings.  
54  
Rep. gr.40 - Front suspension  
ID.4 2021 ➀  
Running gear, axles, steering - Edition 05.2021  
1 - Subframe  
2 - Suspension link  
3 - Rear suspension link mounting  
4 - Front suspension link mounting  
– Fit tools as shown in illustration. In the process, pay atten‐  
tion to correct orientation, and keep the tools straight.  
– Press out front suspension link mounting -3- as shown in  
illustration.  
Important  
β€’
Bevelled edges of suspension link -4- point upwards when  
pressing out.  
1 - Press tool -VW412-  
2 - Assembly tool -3348-  
3 - Front suspension link mounting  
4 - Suspension link  
5 - Tube -3345-  
6 - Thrust plate -VW401-  
Installing  
– Note installation position of front suspension link mounting  
-2-.  
5. Lower suspension link, swivel joint  
55  
ID.4 2021 ➀  
Running gear, axles, steering - Edition 05.2021  
Important  
β€’
Arrow -4- stamped on front suspension link mounting -2-  
must point between both markings -3- on front suspension  
link -1-.  
β€’
β€’
Cam -5- must point in direction of -arrow B- towards vehicle  
exterior.  
Direction of travel -arrow A-.  
– Observe specified press-in depth.  
1 - Front suspension link mounting  
2 - Suspension link  
Important  
β€’
Dimension -a- = 15.8 mm  
– Press in front suspension link mounting -3- as shown in  
illustration.  
56  
Rep. gr.40 - Front suspension  
ID.4 2021 ➀  
Running gear, axles, steering - Edition 05.2021  
Important  
Bevelled edges of suspension link -4- point downwards  
β€’
when pressing in.  
1 - Press tool -VW412-  
2 - Assembly tool -3348-  
3 - Front suspension link mounting  
4 - Suspension link  
5 - Tube -3345-  
6 - Thrust plate -VW401-  
– Install suspension link β‡’ Rep. gr. 40; Removing and instal‐  
ling suspension link.  
5. Lower suspension link, swivel joint  
57  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!

2024 VW ID.4 Owner's Manual2024 VW ID.4 Owner's Manual
2023 VW ID.4 Owner's Manual2023 VW ID.4 Owner's Manual
2022 VW ID.4 Owner's Manual2022 VW ID.4 Owner's Manual
2021 VW ID.4 Owner's Manual2021 VW ID.4 Owner's Manual
2020 VW ID.4 Owner's Manual2020 VW ID.4 Owner's Manual
2019 VW ID.4 Owner's Manual2019 VW ID.4 Owner's Manual
VW ID.4 Service & Repair ManualVW ID.4 Service & Repair Manual
VW ID.4 Service & Owner's Manuals

ID4manual.com

VW ID.4 Service & Owner's Manuals - view online or download in PDF for free!

Useful links
Follow Us