ID.4 2021 ➤, ID.3 2020 ➤
Electric rear-wheel drive EIP220 and all-wheel drive EIA200, EIP220 - Edition 11.2021
❑ ⇒ Rep. gr. 93; Removing and installing battery modules control unit
14 - Battery modules control unit 5 -J1212-
❑ ⇒ Rep. gr. 93; Removing and installing battery modules control unit
15 - Battery modules control unit 9 -J1216-
❑ ⇒ Rep. gr. 93; Removing and installing battery modules control unit
5.4
Overview of fitting locations – battery connectors
The overview is shown for the high-voltage battery, 82 kW/h, as
an example.
1 - Battery module 1 -J991-
2 - Battery module 2 -J992-
3 - Battery module 3 -J993-
4 - Battery module 4 -J994-
5 - Battery module 5 -J995-
6 - Battery module 6 -J996-
7 - Battery module 7 -J997-
8 - Battery module 8 -J998-
9 - Battery module 9 -J999-
10 - Battery module 10 -
J1000-
11 - Battery module 11 -
J1001-
12 - Battery module 12 -
J1002-
5.5
Assembly overview – high-voltage bat‐
tery, removed, 48, 55, 62 kWh
5.5.1
Assembly overview – high-voltage battery, removed
5. High-voltage battery components
167
ID.4 2021 ➤, ID.3 2020 ➤
Electric rear-wheel drive EIP220 and all-wheel drive EIA200, EIP220 - Edition 11.2021
1 - Upper part of battery hous‐
ing
❑ ⇒ Rep. gr. 93; Opening
high-voltage battery 1
[AX2]
❑ ⇒ Rep. gr. 93; Sealing
high-voltage battery 1
[AX2], 48, 55, 62 kWh
❑ Renew after removing
2 - Bolt
❑ Qty. 14
❑ Renew after removing
❑ Specified torque and
tightening sequence 1
❑ M5 x 18
3 - Small fastener
❑ Qty. 2
❑ Renew after removing
❑ Specified torque and
tightening sequence 1
4 - Large fastener
❑ Qty. 2
❑ Renew after removing
❑ Specified torque and
tightening sequence 1
5 - Spacer
❑ Qty. 8
6 - Bolt
❑ Qty. 72
❑ Renew after removing
❑ Specified torque and tightening sequence 2 ⇒ page 169
7 - Separating film
❑ Renew after removal of high-voltage battery 1 -AX2-
❑ Qty. 14
8 - Lower part of battery housing
9 - Bolt
❑ Qty. 16
❑ M5 x 25
❑ 4.5 Nm
10 - Pressure relief valve
11 - Potential equalisation
12 - Nut
❑ M6 x 10
❑ 8 Nm
Specified torque and tightening sequence 1
168
Rep. gr.93 - Electric drive systems
ID.4 2021 ➤, ID.3 2020 ➤
Electric rear-wheel drive EIP220 and all-wheel drive EIA200, EIP220 - Edition 11.2021
Stage Bolts
Specified torque/turning further angle
1.1
1.2
-1- to -4- 100 Nm
-5- to -18- 5.5 Nm + 90°
Specified torque and tightening sequence 2
Stage Bolts
Specified torque/turning further angle
-A-, -B-, -C-, -D- 8 Nm
-1- to -72- 8 Nm
2.1
2.2
5.6
Assembly overview – high-voltage bat‐
tery, removed, 82 kWh
5.6.1
Assembly overview – high-voltage battery, removed
5. High-voltage battery components
169
2024 VW ID.4 Owner's Manual
