Table of Contents > Electric drive systems > Motor control unit > Assembly overview – motor control unit

VW ID.4 Electric rear-wheel and all-wheel drive ➜ Assembly overview – motor control unit

ID.4 2021 ➤, ID.3 2020 ➤  
Electric rear-wheel drive EIP220 and all-wheel drive EIA200, EIP220 - Edition 11.2021  
8
Motor control unit  
8.1  
Assembly overview – motor control unit  
1 - Bracket for motor control  
unit  
❑ ⇒ Rep. gr. 93; Remov‐  
ing and installing brack‐  
et for motor control unit  
[J623]  
2 - Motor control unit -J623-  
❑ ⇒ Rep. gr. 93; Remov‐  
ing and installing motor  
control unit [J623]  
3 - Electrical connector  
8.2  
Removing and installing motor control  
unit [J623]  
Removing  
If the motor control unit -J623- is renewed, perform the test plan  
for the renewal of the motor control unit:  
Continued  
– Carry out function “Renew control unit” using ⇒ Vehicle diag‐  
nostic tester ⇒ Rep. gr. 00; Access to diagnoses.  
– Disconnect battery ⇒ Electrical system; Rep. gr. 27; Battery;  
Disconnecting and connecting battery.  
244  
Rep. gr.93 - Electric drive systems  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!