ID.4 2021 ➤, ID.3 2020 ➤
Electric rear-wheel drive EIP220 and all-wheel drive EIA200, EIP220 - Edition 11.2021
6
Power and control electronics for
electric drive
6.1
Assembly overview – power and con‐
trol electronics for electric drive, rear-
wheel drive
6.1.1
Assembly overview – power and con‐
trol electronics for electric drive [JX1]
– ⇒ Rep. gr. 93; Assembly overview – electric drive motor
6.2
Assembly overview – power and con‐
trol electronics for electric drive, all-
wheel drive
6.2.1
Assembly overview – power and con‐
trol electronics 2 for electric drive [JX4]
– ⇒ Rep. gr. 93; Assembly overview – electric drive motor
6.2.2
Assembly overview – power and con‐
trol electronics for electric drive [JX1]
– ⇒ Rep. gr. 93; Assembly overview – electric drive motor
6.3
Removing and installing power and
control electronics for electric drive,
rear-wheel drive
6.3.1
Removing and installing power and
control electronics for electric drive
[JX1]
Special tools and workshop equipment required
♦ anti-twist protection -T10614-
♦ puller -T10611-
The power and control electronics for electric drive -JX1- will
henceforth be referred to as “power and control electronics”.
The three-phase current drive -VX54- will henceforth be refer‐
red to as “three-phase current drive”.
Removing
– ⇒ Rep. gr. 10; Removing rear motor.
– ⇒ Rep. gr. 10; Securing motor to engine and gearbox sup‐
port, rear motor.
– Remove clamping washers -arrows- and take off noise insu‐
lation -1-.
200
Rep. gr.93 - Electric drive systems
2024 VW ID.4 Owner's Manual
