ID.4 2021 ➤, ID.3 2020 ➤
Electric rear-wheel drive EIP220 and all-wheel drive EIA200, EIP220 - Edition 11.2021
– Remove right lower A-pillar trim ⇒ General body repairs,
interior; Rep. gr. 70; Trims, interior; Removing and installing
lower A-pillar trim.
– Separate connectors -2-.
– Release bracket -1--arrow- in direction of passenger com‐
partment, and pull out motor control unit -J623--3-.
Installing
Install in reverse order of removal, observing the following:
If the motor control unit -J623- has been renewed, perform the
test plan for the renewal of the motor control unit:
Continued
– Carry out function “Renew control unit” using ⇒ Vehicle diag‐
nostic tester ⇒ Rep. gr. 00; Access to diagnoses.
8.3
Removing and installing bracket for
motor control unit [J623]
Removing
– Remove motor control unit -J623- ⇒ Rep. gr. 93; Removing
and installing motor control unit [J623].
– Press together retaining clips in direction of -arrow-.
– Remove bracket for motor control unit -J623--1-.
Installing
Install in reverse order of removal.
8. Motor control unit
245
2024 VW ID.4 Owner's Manual
