ID.4 2021 ➤
Brake system - Edition 07.2021
5
Brake pedal
5.1
5.1.1
Assembly overview – brake pedal
Assembly overview – brake pedal, left-hand drive vehicles
1 - Mounting bracket
❑ ⇒ Rep. gr. 46; Re‐
moving and installing
mounting bracket
2 - Nut
❑ Qty. 5
❑ Renew after removing
❑ Specified torque and
tightening sequence ⇒
3 - Pivot pin
❑ Renew after removing
4 - Cap
5 - Brake pedal
❑ ⇒ Rep. gr. 46; Separat‐
ing brake pedal from
brake servo
❑ ⇒ Rep. gr. 46; Con‐
necting brake pedal to
brake servo
❑ ⇒ a5.4.1 nd installing
brake pedal, left-hand
drive vehicles”, page
61
6 - Mounting
❑ For ball head of brake
servo push rod
7 - Bearing shell
8 - Bearing bush
9 - Clamping washer
❑ Renew after removing
Mounting bracket – specified torque and tightening sequence
5. Brake pedal
57
ID.4 2021 ➤
Brake system - Edition 07.2021
Stage
Nut
Specified tor‐
que/turning further
angle
1.
2.
3.
-1- and -2-
-3- and -4-
-5-
20 Nm
20 Nm
20 Nm
5.1.2
Assembly overview – brake pedal, right-hand drive vehicles
58
Rep. gr.46 - Brakes - mechanism
ID.4 2021 ➤
Brake system - Edition 07.2021
1 - Mounting bracket
❑ ⇒ Rep. gr. 46; Re‐
moving and installing
mounting bracket
2 - Nut
❑ Qty. 5
❑ Renew after removing
❑ Specified torque and
tightening sequence ⇒
3 - Cap
4 - Brake pedal
❑ ⇒ Rep. gr. 46; Separat‐
ing brake pedal from
brake servo
❑ ⇒ Rep. gr. 46; Con‐
necting brake pedal to
brake servo
❑ ⇒ a5.4.1 nd installing
brake pedal, left-hand
drive vehicles”, page
61
5 - Bearing shell
6 - Mounting
❑ For ball head of brake
servo push rod
7 - Pivot pin
❑ Renew after removing
8 - Bearing bush
9 - Nut
❑ Renew after removing
❑ 20 Nm
Mounting bracket – specified torque and tightening sequence
Stage
Nut
Specified tor‐
que/turning further
angle
1.
2.
-1- and -2-
-3- and -4-
20 Nm
20 Nm
5. Brake pedal
59
ID.4 2021 ➤
Brake system - Edition 07.2021
Stage
Nut
Specified tor‐
que/turning further
angle
3.
-5-
20 Nm
5.2
Separating brake pedal from brake ser‐
vo
Special tools and workshop equipment required
♦ Release tool -T10006A-
♦ release tool -T10006A-
Removing
– For reasons of clarity, the pedal cluster is not shown in the
illustrations of the following work procedures.
– First press brake pedal -1- in direction of brake servo, and
hold it in this position.
1 - Brake pedal
2 - Push bar
3 - Retaining lugs
4 - Mounting bracket
A - Release tool -T10006A-
– Insert release tool -T10006A- -A- , and pull it in direction of
front seat. When doing this, counterhold on brake pedal -1- .
At this stage, pedal must not be allowed to move towards
front seat. This action will press retaining lugs -3- of mount‐
ing off ball head of plunger rod -2- .
– Pull release tool -T10006A- -A- and brake pedal -1- together
towards front seat. When doing this, brake pedal -1- is pulled
off ball head of push rod -2- .
5.3
Connecting brake pedal to brake servo
– Hold ball head of push rod -2- in front of mounting -1-, and
push brake pedal in direction of -arrow- towards brake servo.
The ball head of the push rod must be heard to engage.
60
Rep. gr.46 - Brakes - mechanism
2024 VW ID.4 Owner's Manual
