Table of Contents > Checking wheel brake cylinder for leaks

VW ID.4 Brake System ➜ Checking wheel brake cylinder for leaks

ID.4 2021 ➤  
Brake system - Edition 07.2021  
– Apply pressure to brake pedal until gauge indicates a pres‐  
sure of 50 bar.  
Important  
The pressure must not drop by more than 4 bar during the  
test period of 45 seconds. Renew brake master cylinder if  
drop in pressure exceeds specification.  
Tightening torques  
♦ ⇒ Rep. gr. 46; Assembly overview – front brake  
3.5  
Checking wheel brake cylinder for  
leaks  
Special tools and workshop equipment required  
♦ removal wedge -3409-  
Removing  
– Lift off dust boot -1- using removal wedge -3409- -2-.  
– If brake fluid is found in the dust boot, renew wheel brake  
cylinder.  
Ensure the dust boot is not damaged when lifting off.  
3. Hydraulic system  
83  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!