ID.4 2021 ➤, ID.5 2021 ➤
Maintenance - Edition 11.2021
– To rectify dents, slide bellows upwards, reach inside the
bellows with your hand and press out the dents.
– Check that bellows are properly engaged in axial bearing:
♦ Correct position: bellows can be turned around rotational
axis while seated in axial bearing.
♦ Otherwise pull bellows all-round out of axial bearing by one
notch.
♦ After that, the bellows should be able to be turned around
rotational axis.
4.39
Clock and date: setting
Setting time and date in Infotainment system
– Switch on ignition.
– Switch on Infotainment system.
– Press Setup function button.
– Select function button Time and date.
– Select function button Time and set current time.
– Select function button Date set current date.
4.40
Underbody: inspecting for damage to
underbody sealant, underbody panels,
routing of lines, plugs
NOTICE
During inspection, also check floor pan, wheel housings and
sills.
Risk of corrosion and rust penetration.
– Ensure that all lines are secured in their mountings, all
plugs are available and there is no visible damage to un‐
derbody.
– Faults found must always be rectified (repair measure).
4.41
Warning sticker ID.4: checking
All high-voltage components are equipped with warning stick‐
ers.
When performing maintenance work, make sure that these
warning stickers are not soiled or damaged and are present
on all high-voltage components.
68
4. Descriptions of work
2024 VW ID.4 Owner's Manual
