ID.4 2021 ➤, ID.5 2021 ➤
Maintenance - Edition 11.2021
♦ The wheels on one axle are loaded more heavily (e.g. when
towing a trailer or when driving in mountains).
♦ Snow chains are fitted.
♦ The temporary spare wheel is fitted.
♦ One wheel per axle has been changed.
The tyre pressure monitoring warning lamp has a yellow warn‐
ing lamp in the dash panel insert -arrow-.
♦ A “PERMANENT LIGHTING-UP” in conjunction with a warn‐
ing tone, means “WARNING”, pressure loss has been detec‐
ted, check tyre pressure and carry out calibration.
Calibration
– Switch on ignition.
– Switch on Infotainment system.
– Personalisation: select user and confirm with function button
OK .
– Press Vehicle function button.
– Select function button Status .
– Select function button Status (top).
– Navigate to last menu.
– Press Set function button.
– Confirm tyre pressures with function button Confirm .
4.31
Tyre repair set: checking
Note
♦ Depending on the equipment level, the vehicles are equip‐
ped with a breakdown set.
♦ It also contains a filling bottle with tyre sealant.
4. Descriptions of work
53
ID.4 2021 ➤, ID.5 2021 ➤
Maintenance - Edition 11.2021
The breakdown set is located in the tool bag -1- in the luggage
compartment well.
The breakdown set includes a bottle of tyre sealant -2- and a
compressor -3-.
The tyre sealant in the bottle has a limited storage life.
The expiry date is therefore specified on the bottle -2-.
– Enter expiry date in maintenance table.
– If the expiry date has been reached, replace tyre sealant.
(The tyre sealant must not be more than 4 years old).
4.32
Window wash/wipe system and head‐
light washer system: checking function
Checking anti-freeze protection of fluid, topping up fluid ⇒ page
Window wash/wipe system: check spray jet settings and adjust
if necessary ⇒ page 56
Windscreen wiper blades: check park position ⇒ page 57 .
Rear window wiper blades: checking park position ⇒ page 57
4.32.1
Anti-freeze: checking protection of flu‐
id, topping up fluid if necessary
Special tools and workshop equipment required
♦ Refractometer -T10007A-
♦ Refractometer -T10007B-
Note
In countries and regions where no frost occurs due to the local
climatic conditions, the anti-freeze protection does not need to
be checked.
Read precise value for the following tests at light-dark border.
Using a pipette, place a drop of water on the glass to improve
the readability of the light-dark border. The light-dark border can
be clearly recognised on the “WATERLINE”.
– Check concentration of anti-freeze additive using refractom‐
eter.
The scale -4- of the refractometer is applicable for the anti-
freeze protection of the window wash/wipe system.
54
4. Descriptions of work
2024 VW ID.4 Owner's Manual
