ID.4 2021 ➤, ID.5 2021 ➤
Maintenance - Edition 11.2021
♦ For normal operating conditions achieving these service in‐
tervals is technically assured.
Service type for service due
♦ On vehicles with text messages on dash panel insert, the
message “Service now” and a “spanner symbol” are dis‐
played.
The service information disappears after a few seconds or if
engine is running.
Service initial warning
If a service is due, “Service initial warning” appears on dash
panel insert display when ignition is switched on.
♦ On vehicles with text messages on dash panel insert display
the following appears: “Service in --- km or --- days”.
The service information disappears after a few seconds or if
engine is running.
♦ The service initial warning is displayed 20 days before the
next service is due.
♦ The remaining distance displayed is always rounded to the
nearest 100 km or the remaining time rounded to full days.
Retrieving service information from Infotainment system
The current service information can be requested at any time
with the ignition switched on, the engine turned off and the
vehicle at a standstill.
– Switch on ignition.
– Switch on Infotainment system.
– Press Vehicle function button.
– Select menu option Status .
– Press Service function button.
The service information is displayed in Infotainment system.
2.2
Service tables
A new maintenance concept has been introduced with the ID.4 /
ID.5. Compared with the previous concept, the main features
are as follows:
Note
♦ Deviating scopes of service no longer include extended ad‐
ditional inspections. These must now also be carried out
within the scope of every inspection.
♦ Deviating service intervals: inspection is now always due
after the same interval, meaning e.g. for PR-number VI6:
every 2 years.
♦ Individual intervals of the additional work have been adapted
to the new inspection interval.
2.2.1
Delivery inspection
Scope of work
Diagnostic work
– Transportation mode: switch off.
2. Service work
3
ID.4 2021 ➤, ID.5 2021 ➤
Maintenance - Edition 11.2021
Scope of work
– Status of 12V battery: read.
•
Runs automatically on vehicles with battery monitor control unit -367- at switching off of transportation
mode.
– 12V battery: check using -VAS 6161-.
Only applicable to vehicles without battery data module.
•
– Service interval display: reset.
– Event memories of all systems: read.
Vehicle interior
– Front passenger airbag: check key switch and ON/OFF function.
– Vehicle interior: check for cleanliness.
– All switches, electrical consumers, sockets, gauges and other control elements: check function
– Window regulators: initialise (activate).
– Time and date: set.
– Two safety hammers: install according to installation instructions.
•
Applies only to the Netherlands.
– High-voltage battery: check charge level (recommendation: approx. 80% when handing over to custom‐
er)
•
Applies only to BEV and PHEV
Vehicle exterior
– Vehicle exterior: check for cleanliness.
– Wheel bolts: tighten to specified torque.
– Wiper blade protection: remove.
Underside of vehicle
– Vehicle underside (underbody): inspect for damage.
– Brake system: inspect for leaks and damage.
– Transportation devices: remove (if fitted).
– Vehicle underside: inspect for leaks and damage.
Tyres
– Tyre pressure: check.
Engine compartment
– 12V battery: check battery clamp for firm seating.
– Coolant level: check.
– Brake fluid level: check that it is at maximum.
– Brake fluid: renew, if vehicle is older than 12 months.
– Windscreen wash/wipe system and headlight washer system: check function and settings.
Concluding work
– All equipment which has been packed inside vehicle (if part of original equipment): install.
– Tyre Pressure Loss Indicator: calibrate after tyre pressure has been corrected.
– Keys: check number, operation and cleanliness.
– Service Schedule / Digital Service Schedule: enter pre-delivery inspection.
– Carry out road test.
– Charging cable: check that cable is present and check its condition.
•
Applies only to BEV and PHEV
4
2. Service work
ID.4 2021 ➤, ID.5 2021 ➤
Maintenance - Edition 11.2021
Scope of work
– Charging cable bag: securing in luggage compartment
•
Applies only to ID.4 with subwoofer in luggage compartment recess.
2.2.2
Scopes of service
Note
♦ The scopes of service work are generally applicable and dif‐
fer according to vehicle model and equipment level. There is
no relation between individual vehicles and identified vehicle
identification numbers.
♦ Scopes of service work for individual vehicles can be found
only in the maintenance tables. ⇒ Maintenance tables
Inspection
Scope of work
Vehicle in‐
terior
X
– Interior lights: check function of headliner, luggage compartment and glove compartment
lights.
X
X
– Horn: check function.
– Charging cable: check that cable is present and check its condition.
•
Applies only to BEV and PHEV
– High-voltage battery: check charge level, charge as necessary.
Applies only to BEV
X
•
Vehicle ex‐
terior
X
X
X
X
X
X
– Headlight washer system: check function.
– Front lighting: check function.
– Static cornering light (cornering light): check function.
– Automatic headlight control: check function.
– Rear lighting: check function.
– Windscreen wash/wipe system: check function and spray jet settings and adjust if neces‐
sary; check for damage.
X
X
X
X
– Wiper blades: move blades to service position and check for damage; check park position.
– Interior and exterior of body: inspect for corrosion.
– Windscreen: visual check for damage
– High-voltage charging sockets in radiator grille or in tank cap: inspect for soiling and
damage.
•
Applies only to BEV
Underside
of vehicle
X
– Engine and components in engine compartment: inspect for leaks and damage (from
below).
X
X
– Gearbox, final drive and drive shaft boots: inspect for leaks and damage.
– Brakes, front and rear: check thickness of pads/linings and condition of brake discs.
2. Service work
5
ID.4 2021 ➤, ID.5 2021 ➤
Maintenance - Edition 11.2021
Inspection
Scope of work
X
– Swivel joints, axle mountings, coupling rod bearings and anti-roll bar rubber mountings:
perform visual inspection for damage.
X
X
X
– Track rods: check clearance, attachment and boots.
– Brake system and shock absorbers: inspect for leaks and damage.
– Underbody: inspect for damage to undercoating, underbody cladding, routing of lines,
plugs.
X
X
– Front and rear coil springs and rubber buffers: inspect for damage.
– Warning stickers: check that they are present.
•
Applies only to BEV
– Removable towing bracket: check.
If part of equipment
X
•
Tyres
X
X
X
– Tyre pressure: check.
– Tyre mobility set: check for damage and use.
– Tyres: check condition and wear pattern of tyre; enter tread depth.
Engine
compart‐
ment
X
X
– Battery and, if fitted, second battery: check with battery tester.
– Engine and components in engine compartment: inspect for leaks and damage (from
above).
X
X
X
– Brake fluid level (dependent upon brake pad/lining wear): check.
– Cooling system: check anti-freeze protection and coolant level.
– High-voltage components and high-voltage cables: inspect for damage and correct routing
and securing of lines.
•
Applies only to BEV
Concluding
work
X
X
X
X
X
– Service interval display: reset.
– Headlight adjustment: check and adjust as necessary.
– Tyre Pressure Loss Indicator: calibrate after tyre pressure has been corrected.
– Carry out road test.
– High-voltage battery: charge.
•
Applies only to BEV
2.2.3
Service intervals
Scope of work
Climate and traffic conditions usu‐
al for passenger vehicles
Severe operating conditions
VI0
Inspection
---
---
---
1)
every 20,000 km or 1 year
VI5
1)
every 10,000 km or 1 year
VI7
1)
every 10,000 mi or 1 year
6
2. Service work
ID.4 2021 ➤, ID.5 2021 ➤
Maintenance - Edition 11.2021
Scope of work
Climate and traffic conditions usu‐
al for passenger vehicles
Severe operating conditions
---
VI8
1)
every 15,000 km or 1 year
VI6
---
every 2 years
1)
Whichever occurs first.
2.2.4
Interior filter
Scope of work
Climate and traffic conditions usu‐ Countries with high levels of dust
al for passenger vehicles
Every 2 years
⇒ page 14
Interior filter: cleaning housing
and renewing filter element
Max. 1 year
1)
or 30,000 km
1)
Whichever occurs first.
2.2.5
Brake fluid
Scope of work
Brake and clutch system: changing brake fluid
Worldwide
Every 2 years
2.2.6
Air conditioning system with heat
pump: renewing refrigerant R744
(CO )
2
Note
Valid for vehicles from production week 48/21►.
Scope of work
Every 2 years
Every 4 years
Air conditioning system with heat
Bosnia
Bulgaria
France
Greece
Italy
Belgium
Denmark
Germany
Estonia
pump: renewing refrigerant R744
(CO )
2
Finland
Croatia
Malta
Ireland
Iceland
Macedonia
Portugal
Romania
Serbia
Latvia
Lithuania
Luxembourg
Netherlands
Norway
Spain
Turkey
Cyprus
Austria
Poland
Sweden
Switzerland
2. Service work
7
ID.4 2021 ➤, ID.5 2021 ➤
Maintenance - Edition 11.2021
Scope of work
Every 2 years
Every 4 years
Slovakia
Slovenia
Czech Republic
Hungary
United Kingdom
8
2. Service work
2024 VW ID.4 Owner's Manual
