Table of Contents > Lights > Light functions

VW ID.4 2023 Owner's Manual ➜ Light functions

In vehicles with Keyless Access with push-button start, switching on the entry lighting when approaching can be activated or deactivated.  
Light functions  
Cornering lights  
If the low beam headlights are switched on, a cornering light will also switch on during slow turns or in very tight corners.  
When reverse gear is engaged, the cornering lights on both sides of the vehicle will turn on automatically to better illuminate the surroundings while  
maneuvering.  
Automatic headlight control  
If automatic headlights  
are switched on, the vehicle lighting switches on and off automatically along with the instrument illumination under the following  
conditions:  
The light sensor has detected darkness.  
The windshield wipers are switched on for a long time.  
When the lights are turned on, the yellow indicator light  
turns on Switching the lights on and off .  
Automatic headlight control is merely an aid and cannot always accurately detect all driving situations.  
If the vehicle is equipped accordingly, the activation time of the automatic headlights can be adjusted in the vehicle settings in the Infotainment system Vehicle  
settings menu.  
Headlight range control  
The headlight range must always be adapted to the vehicle load level. This provides the driver with the best possible visibility and oncoming traffic is not dazzled. To  
find out whether your vehicle features headlight range control, contact an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Without headlight range control  
The beam of the low beam headlights must be adjusted by an authorized Volkswagen dealer or authorized Volkswagen Service Facility to take into account the  
vehicle's load ⇒  
. Volkswagen recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Dynamic headlight range control  
The headlight range automatically adjusts to the vehicle load when the headlights are switched on ⇒  
.
WARNING  
Heavy objects in the vehicle can affect the vehicle level in such a way that causes the headlights to dazzle and distract other road users. This can cause  
accidents and serious or fatal injuries.  
Always adjust the light cone to the vehicle load so that other road users are not dazzled.  
WARNING  
If the headlight range control fails or malfunctions, the headlights may blind and distract other road users. This can cause accidents and serious or fatal injuries.  
Have the headlight range control inspected immediately by an authorized Volkswagen dealer or authorized Volkswagen Service Facility. Volkswagen  
recommends contacting an authorized Volkswagen dealer or authorized Volkswagen Service Facility.  
Warning tones when lights are not turned off  
If the ignition has been switched off and the driver door is opened, warning tones will sound under the following conditions:  
With the side lights switched on  
.
If the orientation lighting is switched on, the warning tone to indicate that the light is still turned on will not sound when leaving the vehicle Entry and exit lighting  
(orientation lighting).  
Interior lighting  
Instrument and switch illumination  
You can adjust the brightness of the instrument illumination in the vehicle settings in the Infotainment system Vehicle settings menu.  
The selected brightness will automatically adjust to the changing brightness in the vehicle.  
If the automatic headlight control  
based on outside brightness.  
is switched on, a sensor switches the low beam headlights and the instrument and switch lighting on and off automatically  
100  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!