Checking a service interval in the Infotainment system
1. Tap the Vehicle function key.
2. Tap the Status function key.
3. Tap the Service function key to display the service information.
The activated functions are highlighted in color.
The mileage and the days to the next inspection service will be displayed.
Resetting the service display
The service display can only be reset as part of an inspection service by suitably qualified professionals. Volkswagen recommends contacting an authorized
Volkswagen dealer or authorized Volkswagen Service Facility.
The service message disappears automatically after a few seconds when the vehicle has been made drive-ready or when the
function steering wheel is pressed.
button on the multi-
Time and date
Setting the time and date in the Infotainment system
1. Tap the Settings function key ⇒ Vehicle settings menu.
2. Select the Time and date menu item.
The time and date are only displayed in the Infotainment system.
Exit menu
You can adjust the settings of some
functions in the exit menu before
leaving the vehicle. The exit menu will
be displayed in the Infotainment system
when you switch off the ignition.
The entries shown depend on the vehicle equipment and may only be available under certain conditions. The adjustable functions include, for example:
Charging the high-voltage battery.
Stationary air conditioning
Hide
The exit menu is automatically hidden when you leave the vehicle. The exit menu will also be hidden after a short time, depending on the vehicle equipment.
1. To hide the exit menu manually, tap
.
Settings
You can adjust the order of the entries shown.
1. Tap
2. Reorder entries as required.
3. Tap again.
.
Vehicle settings menu
You can switch individual functions and
systems on and off and adjust settings
in the vehicle settings menu in the
Infotainment system.
Opening the Vehicle settings Menu
1. Switch the ignition on.
2. If necessary, switch on the Infotainment system.
3. Tap the Vehicle function key.
4. Depending on the equipment: Tap the Vehicle menu item and choose between the Interior and Exterior function keys.
Or: select the
menu item.
5. Open the preferred item from the submenus and set as desired.
System settings and vehicle information display
Depending on the version, information can be displayed or settings set in the Vehicle settings menu:
Depending on the vehicle equipment: 3D vehicle view (Interior or Exterior).
Depending on vehicle equipment: Performance monitor.
24
Depending on vehicle equipment: Lap timer.
Driving Data.
Vehicle status.
After activating the vehicle's drive system when the 12 V vehicle battery is severely drained or has been replaced or jump-started, system settings, e.g. personal
convenience settings and programming, may be adjusted or deleted. Check and correct the settings after the 12 V vehicle battery is sufficiently recharged.
WARNING
If the driver is distracted, accidents and serious injuries can occur. Operating the Infotainment system can distract you from traffic.
Always drive attentively and responsibly.
Adjust settings in the Infotainment system only when the vehicle is stationary.
Dynamic Road Sign Display
Introduction
The Dynamic Road Sign Display detects
standard road signs using a camera in
the interior rearview mirror base and
informs the driver of detected speed
limits and passing restrictions. Within
the system limits, the system also
displays an additional sign to indicate
special restrictions. The system may
also continue to display the valid speed
limit on roads without signs.
The traffic signs recorded by the Dynamic Road Sign Display are shown in the display of the Volkswagen Digital Cockpit. Depending on the Infotainment system
installed in the vehicle, the road signs may also be displayed there.
Dynamic Road Sign Display is always active when the ignition is started.
Road sign display
Fig. 13 In the instrument cluster display: Example of detected speed limits.
After checking and evaluating the information from the camera, the Infotainment system, and the current vehicle data, the Dynamic Road Sign Display function
displays up to two valid traffic signs and a generic additional sign fig. 13:
1st position: The traffic sign that currently applies is shown on the left side of the display, for example a speed limit of 20 mph (35 km/h).
2nd position: Another road sign can be displayed in the second position, such as a passing restriction.
Additional signs: A recognized additional sign is displayed above the applicable traffic sign. Depending on the system, a generic additional sign is displayed
instead of the actually recognized additional sign. The applicable traffic sign in the display of the instrument cluster is supplemented by the generic
additional sign.
WARNING
The Dynamic Road Sign Display is not a replacement for the driver's attention and works only within the system limitations. Consequently, the Dynamic Road
Sign Display cannot detect all road signs and may not react, or may react with a delay, or may react in a way that is not desired. Driving recommendations and
road signs displayed in the Dynamic Road Sign Display may differ from the actual traffic situation.
Observe the system limitations ⇒ Limits of the Dynamic Road Sign Display .
Always stay attentive and do not rely solely on the system. The driver is always responsible for control of the vehicle.
Traffic signs on the roads and traffic regulations must always take precedence over driving recommendations and displays from the Dynamic Road Sign
Display function.
Always adapt your speed and driving style to the visibility, weather, road and traffic conditions.
25
2024 VW ID.4 Owner's Manual
