Table of Contents > 7 Front heater and air conditioning unit > 7.15 Checking condensation drain

VW ID.4 Heating & Air Conditioning System ➜ 7.15 Checking condensation drain

ID.4 2021 ➤  
Heating, air conditioning system - Edition 09.2021  
Tightening torques  
♦ ⇒ General body repairs, interior; Rep. gr. 70; Passenger  
compartment trim panels; Exploded view - foot rest and floor  
covering  
7.15  
Checking condensation drain  
– Remove floor covering ⇒ General body repairs, interior; Rep.  
gr. 70; Passenger compartment trim panels; Removing and  
installing floor covering.  
NOTICE  
Risk of damage to airbag control unit. Electrical connectors  
corrode when exposed to moisture.  
– After unplugging connectors for control unit, cover them or  
seal them off to prevent moisture from entering.  
– Lug -arrow A- must be engaged at connection of heater and  
air conditioning unit -1-.  
– Sealing lip -4- must be fitted firmly at body opening -3-  
-arrow B-.  
– Condensation drain -2- must not be twisted or crushed.  
– Remove condensation drain and check for constrictions  
⇒ Rep. gr. 87; Removing and installing condensation drain.  
Installing  
Installation is carried out in reverse sequence.  
Tightening torques  
♦ ⇒ General body repairs, interior; Rep. gr. 70; Passenger  
compartment trim panels; Exploded view - foot rest and floor  
covering  
7.16  
Removing and installing air intake unit  
of heater and air conditioning unit  
Removing  
DANGER  
High voltage can cause fatal injury.  
Danger of severe or fatal injuries from electric shock or elec‐  
tric arcs.  
– Have a high-voltage technician (HVT) or a high-voltage  
expert (HVE) de-energise the high-voltage system.  
7. Front heater and air conditioning unit  
147  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!