Table of Contents > 6 Control motors > 6.1 Overview of fitting locations - control motors (front)

VW ID.4 Heating & Air Conditioning System ➜ 6.1 Overview of fitting locations - control motors (front)

ID.4 2021 ➤  
Heating, air conditioning system - Edition 09.2021  
6
Control motors  
6.1  
Overview of fitting locations - control motors (front)  
6. Control motors  
107  
ID.4 2021 ➤  
Heating, air conditioning system - Edition 09.2021  
1 - Control motor for fresh  
air and air recirculation flap -  
VX96-  
❑ With fresh air/air recir‐  
culation, air flow flap  
control motor -V425-  
❑ With potentiometer for  
fresh air/air recircula‐  
tion, air flow flap control  
motor -G644-  
❑ ⇒ Rep. gr. 87; Remov‐  
ing and installing con‐  
trol motor for fresh  
air and air recirculation  
flap VX96  
2 - Control motor for front left  
temperature flap -VX34-  
❑ With left temperature  
flap control motor -  
V158-  
❑ With potentiometer for  
left temperature flap  
control motor -G220-  
❑ ⇒ Rep. gr. 87; Remov‐  
ing and installing front  
left temperature flap  
VX34  
3 - Control motor for front left  
air distribution flap -VX93-  
❑ With front left air distri‐  
bution flap control mo‐  
tor -V706-  
❑ With potentiometer for  
front left air distribu‐  
tion flap control motor  
-G1105-  
❑ ⇒ Rep. gr. 87; Removing and installing front left air distribution flap control motor VX93  
4 - Control motor for rear temperature flap -VX95-  
❑ Depending on equipment/vehicle version  
❑ With rear temperature flap control motor -V137-  
❑ With potentiometer for rear temperature flap motor -G479-  
❑ ⇒ Rep. gr. 87; Removing and installing control motor for rear temperature flap VX95  
5 - Control motor for front right air distribution flap -VX94-  
❑ With front right air distribution flap control motor -V707-  
❑ With potentiometer for front right air distribution flap control motor -G1106-  
❑ ⇒ Rep. gr. 87; Removing and installing control motor for front right air distribution flap VX94  
6 - Control motor for front right temperature flap -VX35-  
❑ With right temperature flap control motor -V159-  
❑ With potentiometer for right temperature flap control motor -G221-  
❑ ⇒ Rep. gr. 87; Removing and installing control motor for front right temperature flap VX35  
7 - Control motor for defroster flap -VX47-  
❑ With defroster flap control motor -V107-  
❑ With potentiometer for defroster flap control motor -G135-  
❑ ⇒ Rep. gr. 87; Removing and installing control motor for defroster flap VX47  
108  
Rep. gr.87 - Air conditioning system  
ID.4 2021 ➤  
Heating, air conditioning system - Edition 09.2021  
6.2  
Assembly overview – control motors,  
PR numbers KC0, KH4  
6.2.1  
Exploded view - control motors (front)  
Exploded view - control motors (front left)  
1 - Control motor for front left  
temperature flap -VX34-  
❑ ⇒ Rep. gr. 87; Remov‐  
ing and installing con‐  
trol motor for front left  
temperature flap VX34  
2 - Bolt  
❑ 1.5 Nm  
3 - Control motor for front left  
air distribution flap -VX93-  
❑ ⇒ Rep. gr. 87; Re‐  
moving and installing  
control motor for front  
left air distribution flap  
VX93 - left-hand drive  
vehicles  
4 - Actuator  
5 - Heater and air conditioning  
unit  
❑ ⇒ Rep. gr. 87; Remov‐  
ing and installing heater  
and air conditioning unit  
Exploded view - control motors (front right)  
6. Control motors  
109  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!