ID.4 2021 ➤
Heating, air conditioning system - Edition 09.2021
Tightening torques
♦ ⇒ Rep. gr. 87; Assembly overview – front control motors
6.11
Removing and installing left air distri‐
bution flap actuator
Removing
Mark position of control motors and connectors prior to removal
to avoid interchanging control motors at reinstallation.
– Remove dash panel ⇒ General body repairs, interior; Rep.
gr. 70; Dash panel; Removing and installing dash panel.
– Remove control motor for front left temperature flap -VX34-
⇒ Rep. gr. 87; Removing and installing control motor for
front left temperature flap [VX34].
– Remove control motor for front left air distribution flap -
VX93- ⇒ Rep. gr. 87; Removing and installing front left air
distribution flap control motor [VX93].
– Unhook wiring harness.
– Detach operating lever -2-.
– Unscrew bolts -3-.
– Remove air distribution flap actuator -1-.
Installing
Install in reverse order of removal, observing the following:
– Route electrical wire so that it cannot come into contact with
any moving parts (e.g. actuating arm on control motor).
Tightening torques
♦ ⇒ Rep. gr. 87; Assembly overview – front control motors
♦ ⇒ General body repairs, interior; Rep. gr. 70; Dash panel;
Assembly overview – dash panel
6.12
Removing and installing right air distri‐
bution flap actuator
Removing
Mark position of control motors and connectors prior to removal
to avoid interchanging control motors at reinstallation.
– Remove dash panel ⇒ General body repairs, interior; Rep.
gr. 70; Dash panel; Removing and installing dash panel.
– Remove control motor for front right temperature flap -VX35-
⇒ Rep. gr. 87; Removing and installing control motor for
front right temperature flap [VX35].
128
Rep. gr.87 - Air conditioning system
ID.4 2021 ➤
Heating, air conditioning system - Edition 09.2021
– Remove control motor for front right air distribution flap -
VX94- ⇒ Rep. gr. 87; Removing and installing front right air
distribution flap control motor [VX94].
– Unhook wiring harness.
– Detach operating lever -1-.
– Unscrew bolts -3-.
– Remove air distribution flap actuator -2-.
Installing
Install in reverse order of removal, observing the following:
– Route electrical wire so that it cannot come into contact with
any moving parts (e.g. actuating arm on control motor).
Tightening torques
♦ ⇒ Rep. gr. 87; Assembly overview – front control motors
♦ ⇒ General body repairs, interior; Rep. gr. 70; Dash panel;
Assembly overview – dash panel
6. Control motors
129
2024 VW ID.4 Owner's Manual
