ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
– Fill weld seam -3- with window adhesive.
Touching up paint damage
– If the paint is damaged, the paintwork structure must be
restored according to specifications in the “Paint” workshop
manual.
2.7
Cleaning off excess adhesive
Note
Observe safety regulations ⇒ o2.7 ff excess adhesive”, page
182 .
Note
When cleaning the vehicle interior, do not push window out‐
wards that had just been installed. Otherwise, the window will
be detached.
– Clean painted surface as well as possible using a dry cloth.
– Remove remaining contamination using cleaning agent.
Note
Use adhesive remover as cleaning agent.
– Cleaning plastic trim: Allow adhesive sealant to cure (ap‐
prox. 1 hour) and then peel off.
182
Rep. gr.64 - Glazing
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
3
Windscreen
3.1
Assembly overview – windscreen
1 - Windscreen
❑ ⇒ Rep. gr. 64; Remov‐
ing and installing wind‐
screen
2 - Body flange
3 - Centring pin
❑ Depending on equip‐
ment/version
❑ qty. 2
4 - Mounting for centring pin
5 - Water deflector
❑ ⇒ a3.9.1 nd installing
water deflector”, page
225
6 - Retaining strip
❑ ⇒ a3.9.2 nd installing
retaining strip”, page
225
7 - Plenum chamber cover
❑ ⇒ Rep. gr. 50; Remov‐
ing and installing ple‐
num chamber cover
3.2
Removing and installing windscreen
Removing and installing windscreen
3.2.1
Special tools and workshop equipment required
♦ cutting cord -VAS 861 001/1A-
♦ removal kit for flush bonded windows -V.A.G 1474B-
♦ windscreen removal kit -VAS 861 001A-
♦ windscreen removal set -VAS 861 001A-
The description for the removal of bonded windows is described
is based on the windscreen removal kit -VAS 861 001A-.
3. Windscreen
183
2024 VW ID.4 Owner's Manual
