Table of Contents > Exterior equipment > 4 Removing and installing Underbody cladding

VW ID.4 Body Repairs Exterior ➜ 4 Removing and installing Underbody cladding

ID.4 2021 ➤  
General body repairs, exterior - Edition 05.2021  
4
Underbody cladding  
4.1  
Assembly overview – underbody clad‐  
ding  
4.1.1  
Assembly overview – underbody cladding, 55 kWh and 62 kWh  
The selected repair information is currently being reviewed and  
will be available soon.  
4.1.2  
Assembly overview – underbody cladding, 82 kWh  
238  
Rep. gr.66 - Exterior equipment  
ID.4 2021 ➤  
General body repairs, exterior - Edition 05.2021  
1 - Front underbody cladding  
❑ ⇒ Rep. gr. 66; Remov‐  
ing and installing front  
underbody cladding  
2 - Side underbody cladding/  
side skid plate  
❑ Left and right  
❑ ⇒ Rep. gr. 66; Remov‐  
ing and installing side  
underbody cladding  
3 - Cover  
❑ Left and right  
❑ Engaged  
4 - Rear side member trim/  
skid plate support  
❑ Left and right  
❑ ⇒ Rep. gr. 66; Remov‐  
ing and installing side  
underbody cladding  
5 - Rear centre underbody  
cladding  
❑ ⇒ Rep. gr. 66; Remov‐  
ing and installing rear  
centre underbody clad‐  
ding  
6 - Rear underbody cladding  
❑ ⇒ Rep. gr. 66; Remov‐  
ing and installing rear  
underbody cladding  
7 - Bolt  
❑ qty. 9  
❑ 2 Nm  
8 - Bolt  
❑ qty. 3  
❑ 2 Nm  
9 - Bolt  
❑ qty. 2  
❑ 8 Nm  
10 - Clip  
❑ qty. 5  
11 - Bolt  
❑ qty. 2 on each side  
❑ 2 Nm  
12 - Bolt  
❑ qty. 5 on each side  
❑ 2 Nm  
13 - Clip  
❑ qty. 4  
14 - Bolt  
❑ qty. 9  
4. Underbody cladding  
239  
ID.4 2021 ➤  
General body repairs, exterior - Edition 05.2021  
❑ 2 Nm  
4.2  
Removing and installing front under‐  
body cladding  
Removing  
– Unscrew bolts -2- and -3-.  
– Unclip clips -4-.  
– Pull front underbody cladding -1- in direction of -arrow A- out  
of bumper cover, and remove it.  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 66; Assembly overview – underbody cladding  
♦ ⇒ Rep. gr. 66; Assembly overview – front wheel housing  
liner  
♦ ⇒ Rep. gr. 63; Assembly overview – bumper cover  
4.3  
Removing and installing side under‐  
body cladding  
Removal and installation are described for the right vehicle side  
as an example.  
Removing  
– Unclip cover -1-.  
240  
Rep. gr.66 - Exterior equipment  
ID.4 2021 ➤  
General body repairs, exterior - Edition 05.2021  
– Unscrew bolts -2-.  
– Remove side member trim -4-.  
– Unscrew bolts -3-.  
– Remove side underbody cladding -5-.  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 66; Assembly overview – underbody cladding  
4.4  
Removing and installing centre under‐  
body cladding  
Removing  
– Unclip covers -3-.  
– Unscrew nuts -4-.  
– Unscrew bolts -5- and -6-.  
4. Underbody cladding  
241  
ID.4 2021 ➤  
General body repairs, exterior - Edition 05.2021  
– Unclip expanding nuts -2-.  
– Pull out centre underbody cladding -1- in direction of  
-arrow A-.  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 66; Assembly overview – underbody cladding  
4.5  
Removing and installing rear centre  
underbody cladding  
Removing  
– Unscrew bolts -3- and -4-.  
– Unclip clips -2-.  
– Remove rear centre underbody cladding -1-.  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 66; Assembly overview – underbody cladding  
4.6  
Removing and installing rear under‐  
body cladding  
Removing  
– Remove rear centre underbody cladding ⇒ Rep. gr. 66; Re‐  
moving and installing rear centre underbody cladding.  
– Unscrew bolts -2-.  
242  
Rep. gr.66 - Exterior equipment  
ID.4 2021 ➤  
General body repairs, exterior - Edition 05.2021  
– Pull rear underbody cladding -1- in direction of -arrow A- out  
of bumper cover, and remove it.  
Installing  
Install in reverse order of removal, observing the following:  
Tightening torques  
♦ ⇒ Rep. gr. 66; Assembly overview – underbody cladding  
♦ ⇒ Rep. gr. 66; Assembly overview – rear wheel housing liner  
4.7  
Removing and installing skid plate  
Removing  
– Remove rear underbody cladding ⇒ Rep. gr. 66; Removing  
and installing rear underbody cladding.  
– Unscrew bolts -2-.  
– Remove skid plate -1-.  
Installing  
Install in reverse order of removal, observing the following:  
4. Underbody cladding  
243  
ID.4 2021 ➤  
General body repairs, exterior - Edition 05.2021  
Tightening torques  
♦ ⇒ Rep. gr. 66; Assembly overview – underbody cladding  
244  
Rep. gr.66 - Exterior equipment  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!