Table of Contents > Glazing > 2.1 Minimum drying times for bonded windows

VW ID.4 Body Repairs Exterior ➜ 2.1 Minimum drying times for bonded windows

ID.4 2021 ➤  
General body repairs, exterior - Edition 05.2021  
64 – Glazing  
1
Safety information and repair notes  
1.1  
Safety information  
⇒ Safety information and repair notes; Rep. gr. 00; Safety infor‐  
mation  
1.2  
Repair notes  
⇒ Safety information and repair notes; Rep. gr. 00; Repair notes  
176  
Rep. gr.64 - Glazing  
ID.4 2021 ➤  
General body repairs, exterior - Edition 05.2021  
2
Repair notes  
2.1  
Minimum drying times for bonded win‐  
dows  
Special standards must be adhered to when replacing bonded  
windows.  
The vehicle is safe to use only after the minimum drying time  
has elapsed.  
The minimum drying time is the time from bonding in the win‐  
dow until the vehicle may be used. During the minimum drying  
time, the vehicle must be parked on a level surface at room  
temperature (above 15 °C).  
2-component window adhesive  
The minimum drying time for 2-component window adhesive is  
2 hours for all windows.  
If 1-component window adhesive is additionally used for re‐  
maining work or sealing work, the minimum drying time does  
not change.  
1-component window adhesive  
The minimum drying time for 1-component window adhesive is  
6 hours for all windows.  
2.2  
Window repair  
Before the window is repaired, it must be determined whether  
repair is possible or whether the window must be renewed.  
Damaged windows can be repaired using the windscreen repair  
set -VAS 6092A- or window glass polishing set -VAS 861 009-.  
Repairs are not possible, when the damage to the glazing ex‐  
ceeds a certain size or is at certain locations.  
Work instructions are provided with each windscreen repair set  
-VAS 6092A- and window glass polishing set -VAS 861 009-.  
2.3  
Installation instructions for bonded win‐  
dows  
2.3.1  
Fitting instructions  
Special tools and workshop equipment required  
♦ suction lifters -V.A.G 1344-  
NOTICE  
Consequential damage due to fast curing adhesive sealant.  
Leaks and reduced body stiffness may occur.  
– Install the window within 10 minutes after applying the ad‐  
hesive sealant.  
– Apply adhesive sealant -1- in continuous bead, holding ap‐  
plicator at right angle to glazing -2-.  
2. Repair notes  
177  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!