ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
6
Door windows
6.1
Assembly overview – front door win‐
dow
6.1.1
Assembly overview – front door window
The overview is shown for the left side of vehicle as an exam‐
ple.
1 - Front door window
❑ ⇒ Rep. gr. 64; Remov‐
ing and installing front
door window
2 - Assembly carrier
❑ ⇒ Rep. gr. 57; Assem‐
bly overview – assem‐
bly carrier
3 - Cap
❑ qty. 2
4 - Window regulator clamp‐
ing jaw
❑ qty. 2
6.1.2
Assembly overview – fixed front door window
The overview is shown for the left side of vehicle as an exam‐
ple.
6. Door windows
197
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
1 - Fixed front door window
❑ ⇒ Rep. gr. 64; Remov‐
ing and installing fixed
front door window
2 - Bolt
❑ 8 Nm
3 - Plug
4 - Clip
❑ qty. 2
6.2
Assembly overview – rear door window
Assembly overview – rear door window
6.2.1
The overview is shown for the left side of vehicle as an exam‐
ple.
198
Rep. gr.64 - Glazing
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
1 - Door window
❑ ⇒ Rep. gr. 64; Remov‐
ing and installing rear
door window
2 - Assembly carrier
❑ ⇒ Rep. gr. 58; Assem‐
bly overview – assem‐
bly carrier
3 - Spreader pin
4 - Spreader plug
5 - Cap
6 - Window regulator
6.2.2
Assembly overview – fixed rear door window
The overview is shown for the left side of vehicle as an exam‐
ple.
6. Door windows
199
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
1 - Seal
❑ Can be renewed only
together with fixed rear
door window
2 - Clip
❑ qty. 3
3 - Fixed rear door window
❑ ⇒ Rep. gr. 64; Remov‐
ing and installing fixed
rear door window
4 - Door
5 - Bolt
❑ 8 Nm
6 - Cap
6.3
Removing and installing front door win‐
dow
Special tools and workshop equipment required
♦ high-voltage tool kit -VAS 6762-
♦ removal wedge -3409-
Removal and installation are described for the left side of vehi‐
cle as an example.
Removing
– Remove front door trim ⇒ General body repairs, interior;
Rep. gr. 70; Front door trims; Removing and installing front
door trim.
– Use removal wedge -3409- to lever out caps -3-.
200
Rep. gr.64 - Glazing
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
– Lower door window -1- until clamping jaws of window regula‐
tor -5- become accessible through opening.
If the work step is not possible owing to a fault in the window
regulator motor, remove the window regulator motor ⇒ Rep.
gr. 57; Removing and installing window regulator motor, and
push the door window into the required working position.
– Guide screwdriver -4- from high-voltage tool kit -VAS 6762-
through openings in assembly carrier -2- and door window
-1- to door window mounting.
– Turn screwdriver -4- 90° in direction of -arrow A-, and push
it in direction of -arrow B- into locking devices on clamping
jaws of window regulator -5-, until they are released.
– Slightly lift door window -1- in direction of -arrow C- to pre‐
vent it from falling back into locking devices.
– Pull door window -1- upwards out of window regulator -3-.
– Lift door window -1- at rear, and swing it out of window
channel -2- in direction of -arrow-.
6. Door windows
201
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
Installing
– Swing door window -1- in direction of -arrow- into window
channels -2-.
Important
•
Ensure that the door window is properly inserted in the win‐
dow channel.
– Guide door window -1- without force into clamping jaws of
window regulator.
– Align door window -1- with rear window frame.
– Push door window -1- onto clamping jaws of window regula‐
tor -2- until door window -1- can be heard to engage.
Further installation is carried out in reverse order of removal.
Observe the following:
– Test function before fitting door trim.
202
Rep. gr.64 - Glazing
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
6.4
Removing and installing rear door win‐
dow
Special tools and workshop equipment required
♦ removal wedge -3409-
♦ -T10615/1-
♦ -T10615/2-
Removal and installation are described for the left side of vehi‐
cle as an example.
Removing
– Remove rear door trim ⇒ General body repairs, interior; Rep.
gr. 70; Rear door trims; Removing and installing rear door
trim.
– Use removal wedge -3409- to lever cap -5- out of assembly
carrier -2-.
– Lower door window -1- until spreader rivet -3- and spreader
plug -4- are accessible in cut-out of window regulator -6-.
If the work step is not possible owing to a fault in the window
regulator motor, remove the window regulator motor ⇒ Rep.
gr. 58; Removing and installing window regulator motor, and
push the door window into the required working position.
– Use -T10615/2- to pull spreader rivet -3- out of spreader
plug -4-.
– Use -T10615/1- to pull spreader plug -4- out of window regu‐
lator guide -6-.
Make sure that the spreader plug -4- does not fall into the door.
– Remove B-pillar trim on rear door ⇒ a3.11.2 nd installing
B-pillar trim on rear door”, page 228 .
– Pull front section of window channel -2- out of mounting.
6. Door windows
203
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
– Pull door window -1- in direction of -arrow- towards vehicle
exterior and out of window slot.
Installing
– With door window -1- removed, insert spreader plug -4-
making sure it is centred properly.
– Press spreader pin -3- flush into spreader plug -4-.
– Insert door window -1- in direction of -arrow- into door, and
push it into slot of window regulator guide.
– Let door window -1- engage in window regulator -2- applying
light pressure from above.
Continue installation in reverse order of removal, observing the
following:
– Test function before fitting door trim.
6.5
Removing and installing fixed front
door window
Special tools and workshop equipment required
204
Rep. gr.64 - Glazing
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
♦ release tool -T10236-
Removal and installation are described for the left side of vehi‐
cle as an example.
Removing
– Remove front door trim ⇒ General body repairs, interior;
Rep. gr. 70; Front door trims; Removing and installing front
door trim.
– Remove window channel ⇒ Rep. gr. 57; Removing and in‐
stalling window channel.
– Lever off plug -5-.
– Unscrew bolt -4-
– Pull seal off flange.
– Push fixed door window -1- slightly in direction of -arrow A-,
and use release tool -T10236--6- to unclip clips -2- one after
the other.
– Pull fixed door window -1- in direction of -arrow B- out of
door -3-.
Installing
– Guide fixed door window -1- with web in direction of
-arrow A- into door -4-.
6. Door windows
205
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
– Push fixed door window -1- in direction of -arrow B- against
door -4- until clips -2- can be heard to engage.
– Tighten bolt -5-.
– Fold seal -3- around flange.
– Fit plug -6-.
Continue installation in reverse order of removal, observing the
following:
Tightening torques
♦ ⇒ o6.1.2 verview – fixed front door window”, page 197
6.6
Removing and installing fixed rear door
window
Special tools and workshop equipment required
♦ release tool -T10236-
Removal and installation are described for the left side of vehi‐
cle as an example.
Removing
– Remove rear door trim ⇒ General body repairs, interior; Rep.
gr. 70; Rear door trims; Removing and installing rear door
trim.
– Remove window channel ⇒ Rep. gr. 58; Removing and in‐
stalling window channel.
– Lever off plug -7-.
206
Rep. gr.64 - Glazing
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
– Unscrew bolt -6-
– Pull seal -2- off flange.
– Push fixed door window -1- slightly in direction of -arrow A-,
and use release tool -T10236--3- to unclip clips -5- one after
the other.
– Pull fixed door window -1- in direction of -arrow B- out of
door -4-.
Installing
– Guide fixed door window -1- with web in direction of
-arrow A- into door -4-.
– Push fixed door window in direction of -arrow B- against
door -4- until clips -2- can be heard to engage.
– Tighten bolt -5-.
– Fold seal -3- around flange.
– Fit cap -6-.
Continue installation in reverse order of removal, observing the
following:
6. Door windows
207
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
Tightening torques
♦ ⇒ o6.2.2 verview – fixed rear door window”, page 199
208
Rep. gr.64 - Glazing
2024 VW ID.4 Owner's Manual
