ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
8
Wheel housing liner
8.1
Assembly overview – front wheel housing liner
The overview is shown for the left side of vehicle as an exam‐
ple.
1 - Front wheel housing liner
❑ ⇒ Rep. gr. 66; Remov‐
ing and installing front
wheel housing liner
2 - Bolt
❑ qty. 13
❑ 2 Nm
3 - Expanding nut
❑ qty. 6
4 - Spreader rivet
❑ qty. 2
8.2
Assembly overview – rear wheel housing liner
The overview is shown for the left side of vehicle as an exam‐
ple.
8. Wheel housing liner
259
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
1 - Rear wheel housing liner
❑ ⇒ a8.4.1 nd installing
rear wheel housing lin‐
er”, page 262
2 - Side member cover
❑ ⇒ a8.4.2 nd installing
side member cover”,
page 263
3 - Expanding nut
❑ qty. 9
4 - Bolt
❑ qty. 13
❑ 2 Nm
8.3
Removing and installing front wheel
housing liner
Removal and installation are described for the left side of vehi‐
cle as an example.
For a better view of the bolts, the wheel is not shown in the
illustration.
Removing
– Lever off spreader rivets -3-.
260
Rep. gr.66 - Exterior equipment
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
– Unscrew bolts -4-.
– Unclip flap -1- in direction of -arrow A-.
– Pull out front wheel housing liner -2-.
Installing
Install in reverse order of removal, observing the following:
– Clip in flap -1- in direction of -arrow A-.
– Align front wheel housing liner -2-.
Important
•
Vehicle must be standing on its wheels.
– Secure flap -1- with spreader rivets -2-.
8. Wheel housing liner
261
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
Tightening torques
♦ ⇒ Rep. gr. 66; Assembly overview – front wheel housing
liner
8.4
Removing and installing rear wheel
housing liner
8.4.1
Removing and installing rear wheel
housing liner
Removal and installation are described for the left side of vehi‐
cle as an example.
Removing
– Remove rear wheel ⇒ Running gear, axles, steering; Rep.
gr. 44; Wheels, tyres; Removing wheel.
– Unscrew bolts -2-.
– Pull out rear wheel housing liner -1-.
Installing
Install in reverse order of removal, observing the following:
Important
•
Side member trim is installed ⇒ a8.4.2 nd installing side
member cover”, page 263 .
262
Rep. gr.66 - Exterior equipment
ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
Tightening torques
♦ ⇒ Rep. gr. 66; Assembly overview – rear wheel housing liner
8.4.2
Removing and installing side member
cover
Removal and installation are described for the left side of vehi‐
cle as an example.
Removing
– Remove rear wheel housing liner ⇒ Rep. gr. 66; Removing
and installing rear wheel housing liner.
– Unscrew bolts -2-.
– Remove side member cover -1-.
Installing
Install in reverse order of removal, observing the following:
Tightening torques
♦ ⇒ Rep. gr. 66; Assembly overview – rear wheel housing liner
8. Wheel housing liner
263
2024 VW ID.4 Owner's Manual
