Table of Contents
- Body - front
- Bonnet, rear lid
- Front doors, door components, central locking
- Removing and installing inner and outer door
- Removing and installing door components
- Central locking
- Overview of fitting locations β central locking system
- Removing and installing driver door control unit [J386] and front passenger door control unit [J387]
- Removing and installing rear driver side door control unit [J926] and rear passenger side door control unit [J927]
- Removing and installing ignition key battery
- Removing and installing actuator for high-voltage charging flap lock 1 [F498]
- Rear doors, door components
- Sunroof
- Sliding sunroof
- Minimum drying time for adhesives
- Assembly overview β glass panel
- Assembly overview β sunroof roller blind
- Removing and installing glass panel
- Removing and installing slotted guide
- Removing and installing sliding sunroof adjustment control unit [J245]
- Removing and installing sunroof roller blind
- Adapting sliding sunroof adjustment control unit [J245]
- Removing and installing sunroof roller blind motor [V260]
- Removing and installing sunroof roller blind cables
- Manual operation
- Water drain hoses
- Assembly overview β water drain hoses
- Cleaning water drain hoses
- Removing and installing water drain hoses
- Bumpers
- Glazing
- 2.1 Minimum drying times for bonded windows
- 2.2 Window repair
- 2.3 Installation instructions for bonded windows
- 2.4 Preparing old undamaged windows for installing
- 2.5 Preparing new windows for installing
- 2.6 Preparing body flange for installing
- 2.7 Cleaning off excess adhesive
- 3 Removing and installing windscreen
- 4 Removing and installing rear window
- 5 Removing and installing rear side window
- 6 Removing and installing Door windows
- Exterior equipment
- 2 Removing and installing Spoiler
- 3 Removing and installing Mouldings, trims, extensions
- 4 Removing and installing Underbody cladding
- 5 Renewing protective films
- 6 Removing and installing Roof moulding and roof railing
- 7 Removing and installing exterior mirror
- 8 Removing and installing Wheel housing liner
- 9 Lettering and emblems
- 10 Removing and installing Towing bracket