ID.4 2021 ➤
General body repairs, exterior - Edition 05.2021
2.5
Removing and installing slotted guide
Aid of a second mechanic is required for removal and installa‐
tion of slotted guide.
Removing
– Remove moulded headliner ⇒ General body repairs, interior;
Rep. gr. 70; Roof trims; Removing and installing moulded
headliner.
– Disconnect electrical connector -2-.
– Unscrew nuts -3-, and remove slotted guide -1- from vehicle
with aid of an additional mechanic.
Installing
Install in reverse order of removal, observing the following:
– Start nuts -arrows-, and tighten them by hand.
– Tighten nuts in following sequence: -1-, -2-, -3-, -5- and -6-.
Alternative tightening sequence: -4-, -5-, -6-, -2- and -3-.
– Tighten remaining nuts -arrows- in random sequence.
Tightening torques
♦ ⇒ Rep. gr. 60; Assembly overview – sunroof roller blind
2.6
Removing and installing sliding sunroof
adjustment control unit [J245]
The sliding sunroof adjustment control unit -J245- will hence‐
forth be referred to as “control unit”.
Removing
– Lower the moulded headliner, and place it onto head re‐
straints ⇒ General body repairs, interior; Rep. gr. 70; Roof
trims; Removing and installing moulded headliner.
2. Sliding sunroof
139
2024 VW ID.4 Owner's Manual
