VW ID.4 Service & Owner's Manuals
Table of Contents > Rear doors, door components > 3 Removing and installing Door components

VW ID.4 Body Repairs Exterior ➜ 3 Removing and installing Door components

ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
3
Door components  
3.1  
Assembly overview – door components  
The overview is shown for the left side of vehicle as an exam‐  
ple.  
1 - Door  
❑ β‡’ Rep. gr. 58; Remov‐  
ing and installing door  
❑ β‡’ Rep. gr. 58; Adjust‐  
ing door  
2 - Outer window slot seal  
❑ β‡’ Rep. gr. 58; Remov‐  
ing and installing outer  
window slot seal  
3 - Window channel  
❑ β‡’ Rep. gr. 58; Remov‐  
ing and installing win‐  
dow channel  
4 - Door joint seal  
❑ β‡’ Rep. gr. 58; Remov‐  
ing and installing outer  
door seal  
5 - Inner window slot seal  
❑ β‡’ Rep. gr. 58; Remov‐  
ing and installing inner  
window slot seal  
6 - Plug  
7 - Insulation  
❑ self-adhesive  
8 - Plug  
9 - Plug  
3.2  
Assembly overview – door subframe  
The overview is shown for the left side of vehicle as an exam‐  
ple.  
3. Door components  
115  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
1 - Door subframe  
❑ β‡’ Rep. gr. 58; Remov‐  
ing and installing door  
subframe  
2 - Plug  
3 - Bolt  
❑ 8 Nm  
4 - Clip  
❑ qty. 8  
5 - Rear driver side window  
regulator motor -V471-/rear  
passenger side window regu‐  
lator motor -V472-  
❑ β‡’ Rep. gr. 58; Remov‐  
ing and installing win‐  
dow regulator motor  
6 - Bolt  
❑ qty. 3  
❑ 3 Nm  
7 - Plug  
3.3  
Assembly overview – door handle and door lock  
The overview is shown for the left side of vehicle as an exam‐  
ple.  
116  
Rep. gr.58 - Rear doors, door components  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
1 - Bowden cable  
❑ From interior door han‐  
dle to door lock  
2 - Door lock  
❑ With rear door lock unit,  
driver side -VX83- and  
rear door lock unit, pas‐  
senger side -VX84-  
❑ β‡’ Rep. gr. 58; Remov‐  
ing and installing door  
lock  
3 - Bolt  
❑ qty. 2  
❑ 18 Nm  
4 - Bowden cable  
❑ From door lock to  
mounting bracket  
5 - Door handle  
❑ β‡’ Rep. gr. 58; Remov‐  
ing and installing door  
handle  
6 - Mounting bracket  
❑ β‡’ Rep. gr. 58; Re‐  
moving and installing  
mounting bracket  
3.4  
Removing and installing window regu‐  
lator motor  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Note  
The rear driver side door control unit -J926- / rear passenger  
side door control unit -J927- is separated from the rear driver  
side window regulator motor -V471- / rear passenger side win‐  
dow regulator motor -V472-.  
Note  
The rear driver side window regulator motor -V471- and ear  
passenger side window regulator motor -V472- will henceforth  
be referred to as β€œwindow regulator motor”.  
Removing  
– Remove rear door trim β‡’ General body repairs, interior; Rep.  
gr. 70; Rear door trims; Removing and installing rear door  
trim.  
3. Door components  
117  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
NOTICE  
Risk of damage to door window by sliding down.  
The door window may be scratched or partially chipped.  
– Fix door window in position using adhesive tape.  
– Fix door window in position using adhesive tape.  
– Disconnect electrical connector -3-.  
– Unscrew bolts -2-.  
– Remove window regulator motor -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Fit window regulator motor -1- on mountings -2- of cable  
drum. Move door window up and down slightly so that the  
splines between window regulator motor -1- and cable drum  
engage more easily.  
– Use β‡’ Vehicle diagnostic tester to code new window regula‐  
tor motors.  
Tightening torques  
♦ β‡’ Rep. gr. 58; Assembly overview – assembly carrier  
3.5  
Removing and installing striker pin  
Removing  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removal and installation is identical for the front and rear striker  
pins.  
– Unscrew bolts -2-.  
118  
Rep. gr.58 - Rear doors, door components  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
– Remove striker pin -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– Fit striker pin -1- with curvature -arrow- facing towards cen‐  
tre of vehicle.  
– Pre-tighten bolts -2- to 2 Nm.  
– Adjust striker pin of front door β‡’ Rep. gr. 57; Adjusting strik‐  
er pin.  
– Adjust striker pin of rear door β‡’ Rep. gr. 58; Adjusting striker  
pin.  
Tightening torques  
♦ Front door β‡’ Rep. gr. 57; Assembly overview – door  
♦ Rear door β‡’ Rep. gr. 58; Assembly overview – door  
3.6  
Removing and installing door handle  
Removing  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
– Remove rear door trim β‡’ General body repairs, interior; Rep.  
gr. 70; Rear door trims; Removing and installing rear door  
trim.  
3. Door components  
119  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
– Remove door subframe β‡’ a3.10 nd installing assembly carri‐  
er”, page 123 .  
– Lever off plug -1-.  
– Turn eccentric -2- 180Β° in direction of -arrow-.  
On the right side of the vehicle, the eccentric must be turned  
anti-clockwise.  
– Press and hold rocker switch -2-.  
– Slide sliding plate -1- to stop in direction of -arrow-.  
– Disconnect electrical connector.  
– Swing out door handle -1- in direction of -arrow-, and re‐  
move it.  
Installing  
Install in reverse order of removal, observing the following:  
– Perform functional check with the door open.  
– Read and clear event memory using β‡’ Vehicle diagnostic  
tester.  
120  
Rep. gr.58 - Rear doors, door components  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
3.7  
Removing and installing door handle  
trim  
The selected repair information is currently being reviewed and  
will be available soon.  
3.8  
Removing and installing mounting  
bracket  
Removing  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
– Remove rear door trim β‡’ General body repairs, interior; Rep.  
gr. 70; Rear door trims; Removing and installing rear door  
trim.  
– Remove door subframe β‡’ Rep. gr. 58; Removing and instal‐  
ling door subframe.  
– Detach door lock, and lay it aside with lines connected  
β‡’ Rep. gr. 58; Removing and installing door lock.  
– Remove door handle β‡’ Rep. gr. 58; Removing and installing  
door handle.  
– Guide electrical wire -1- out of guides -2-.  
– Push mounting bracket -3- to stop in direction of -arrow A-,  
and remove it in direction of -arrow B-.  
– Detach Bowden cable -4- in direction of -arrow A-.  
3. Door components  
121  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
– Detach Bowden cable -4- in direction of -arrow B-.  
Installing  
Install in reverse order of removal.  
3.9  
Removing and installing door lock  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removing  
– Remove rear door trim β‡’ General body repairs, interior; Rep.  
gr. 70; Rear door trims; Removing and installing rear door  
trim.  
– Remove door subframe β‡’ a3.10 nd installing assembly carri‐  
er”, page 123 .  
– Disconnect electrical connector -1-.  
– Unscrew bolts -2-.  
– Remove door lock -3- in direction of -arrow-.  
Bowden cables can be detached if this is necessary for subse‐  
quent work.  
Releasing Bowden cable to interior door handle:  
– Turn Bowden cable -2- 90Β° in direction of -arrow A-, and  
unclip it in direction of -arrow B-.  
122  
Rep. gr.58 - Rear doors, door components  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
– Detach Bowden cable -2- in direction of -arrow C- from eye‐  
let in door lock -1-, and remove Bowden cable.  
Releasing Bowden cable to mounting bracket:  
– Turn Bowden cable -2- 90Β° in direction of -arrow A-, and  
unclip it in direction of -arrow B-.  
– Detach Bowden cable -2- in direction of -arrow C- from eye‐  
let in door lock -1-, and remove Bowden cable.  
Installing  
Install in reverse order of removal, observing the following:  
– Perform functional check with door open.  
If the Bowden cables are not engaged correctly, it won’t be  
possible to unlock the door lock and open the door.  
Tightening torques  
♦ β‡’ Rep. gr. 58; Assembly overview – door handle and door  
lock  
3.10  
Removing and installing assembly car‐  
rier  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removing  
– Remove rear door trim β‡’ General body repairs, interior; Rep.  
gr. 70; Rear door trims; Removing and installing rear door  
trim.  
– Lower door window, and detach it from window regulator  
β‡’ Rep. gr. 64; Removing and installing rear door window.  
– Push door window upwards, and secure it with adhesive  
tape.  
3. Door components  
123  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
– Lever off plug -1-.  
– Unscrew bolt -2-  
– Disconnect electrical connectors -3-.  
– Loosen clips -4-, and lay electrical wires aside.  
– Turn clips -1- 90Β° in direction of -arrow A-, and slightly pull  
off assembly carrier -2-.  
– Pull assembly carrier -2- in direction of -arrow B- out of door.  
Installing  
Install in reverse order of removal, observing the following:  
– Insert spreader rivet and spreader plug β‡’ Rep. gr. 64; Re‐  
moving and installing rear door window.  
– Insert assembly carrier.  
Tightening torques  
♦ β‡’ Rep. gr. 58; Assembly overview – assembly carrier  
124  
Rep. gr.58 - Rear doors, door components  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
3.11  
Removing and installing window chan‐  
nel  
NOTICE  
Risk of damage to window channel from applying excessive  
force.  
The metal core of the window channel may be bent.  
– Handle window channel with care.  
Removing  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
– Remove outer window slot seal β‡’ Rep. gr. 58; Removing  
and installing outer window slot seal.  
– Remove B-pillar trim on rear door β‡’ a3.11.2 nd installing  
B-pillar trim on rear door”, page 228 .  
– Remove inner window slot seal β‡’ Rep. gr. 58; Removing  
and installing inner window slot seal.  
– Loosen fixed rear door window β‡’ Rep. gr. 64; Removing and  
installing fixed rear door window.  
– Pull off window channel in area -6- in direction of -arrow B-.  
– Guide out window channel in area -3-.  
– Pull off window channel evenly in areas -3-, -2- and -7- in  
direction of -arrow A- starting at fixed rear door window.  
– Pull off window channel in area -5- in direction of -arrow C-.  
– Pull off window channel in area -4- in direction of -arrow B-.  
– Pull window channel in areas -4- and -5- out of window slot.  
– Pull off window channel in area -2- in direction of -arrow C-,  
and remove it.  
Installing  
Install in reverse order of removal, observing the following:  
– Moisten window channel with soapy solution to facilitate in‐  
stallation.  
3. Door components  
125  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
NOTICE  
Uneven seating and fit of the window channel after installa‐  
tion.  
Wind noise is possible.  
– Ensure that item is seated and comes into contact correct‐  
ly when aligning and installing.  
– Push window channel in areas -4- and -5- into window slot.  
– Fit window channel in area -2- in opposite direction of  
-arrow C-.  
– Fit window channel in area -7- in opposite direction of  
-arrow A-, and align it with B-pillar trim on rear door.  
– Starting at top, push on window channel in area -6-.  
– Starting at B-pillar evenly push on window channel in areas  
-2- and -7-.  
– Push on window channel in area -3- at fixed rear door win‐  
dow.  
– Install fixed rear door window β‡’ Rep. gr. 64; Removing and  
installing fixed rear door window.  
– Push on window channel in areas -4- and -5-.  
3.12  
Removing and installing outer window  
slot seal  
Special tools and workshop equipment required  
♦ removal wedge set -VAS 895 015-  
♦ wedge -T10039/1-  
NOTICE  
Risk of damage to window slot seal from applying excessive  
force.  
The metal core of the outer window slot seal may be bent.  
– Handle outer window slot seal with care.  
126  
Rep. gr.58 - Rear doors, door components  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
Removing  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
– Insert wedge β€œno. 3”-5- from removal wedge set -VAS 895  
015- between outer window slot seal -1- and B-pillar trim on  
rear door -4-.  
– Use wedge -T10039/1--3- to lever off outer window slot seal  
-1- in direction of -arrow A- evenly.  
Installing  
Install in reverse order of removal, observing the following:  
– Align outer window slot seal -1- flush with door edge -2-.  
– Starting at door edge -2-, push outer window slot seal -1- in  
direction of -arrow- evenly by hand.  
3.13  
Removing and installing inner window  
slot seal  
Removal and installation are described for the left side of vehi‐  
cle as an example.  
Removing  
– Remove rear door trim β‡’ General body repairs, interior; Rep.  
gr. 70; Rear door trims; Removing and installing rear door  
trim.  
– Lever inner window slot seal -1- in direction of -arrow A-  
evenly off flange -2- without bending or distorting it.  
3. Door components  
127  
ID.4 2021 ➀  
General body repairs, exterior - Edition 05.2021  
Installing  
– Centre inner window slot seal -1- between front section of  
window channel -4- and rear section of fixed door window  
-3- -arrows A-.  
– Push inner window slot seal -1- in direction of -arrow B- onto  
flange -2- evenly by hand.  
Continue installation in reverse order of removal.  
128  
Rep. gr.58 - Rear doors, door components  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!

2024 VW ID.4 Owner's Manual2024 VW ID.4 Owner's Manual
2023 VW ID.4 Owner's Manual2023 VW ID.4 Owner's Manual
2022 VW ID.4 Owner's Manual2022 VW ID.4 Owner's Manual
2021 VW ID.4 Owner's Manual2021 VW ID.4 Owner's Manual
2020 VW ID.4 Owner's Manual2020 VW ID.4 Owner's Manual
2019 VW ID.4 Owner's Manual2019 VW ID.4 Owner's Manual
VW ID.4 Service & Repair ManualVW ID.4 Service & Repair Manual
VW ID.4 Service & Owner's Manuals

ID4manual.com

VW ID.4 Service & Owner's Manuals - view online or download in PDF for free!

Useful links
Follow Us