ID.4 2021 ➤
Electrical system - Edition 02.2021
All vehicles (continued)
– Unscrew bolts -2-.
– Disconnect electrical connector -3-.
– Remove headlight -1-.
Installing
Install in reverse order of removal, observing the following:
– Push headlight into guide mountings.
– Check headlight settings and adjust headlights if necessary
⇒ Maintenance; Booklet 36.1; Descriptions of work.
Tightening torques
♦ ⇒ Rep. gr. 94; Assembly overview – headlight
2.5
Adjusting headlights
Adjust headlights ⇒ Maintenance; Booklet 51.1; Descriptions of
work.
2.6
Removing and installing front turn sig‐
nal bulb [M5]/[M7]
2.6.1
Removing and installing front turn sig‐
nal bulb [M5]/[M7], ECO headlights
The front left turn signal bulb -M5- and front right turn signal
bulb -M7- will henceforth be referred to as “turn signal bulb”.
Removal and installation are described for the left vehicle side
as an example.
For a better view, the following work procedure is shown with
the front left headlight -MX1- removed.
2. Headlights
63
2024 VW ID.4 Owner's Manual
