Table of Contents > Controls > Removing and installing centre switch module in dash panel [EX22]

VW ID.4 Electrical System ➜ Removing and installing centre switch module in dash panel [EX22]

ID.4 2021 ➤  
Electrical system - Edition 02.2021  
– Remove operating unit for lighting -1-.  
Installing  
Install in reverse order of removal, observing the following:  
– The operating unit for lighting must be heard to engage.  
3.7  
Removing and installing centre switch  
module in dash panel [EX22]  
The centre switch module in dash panel -EX22- will henceforth  
be referred to as “switch module in dash panel”.  
Removing  
– Remove display unit for front information display and operat‐  
ing unit control unit -J685-. ⇒ Communication; Rep. gr. 91;  
Infotainment system; Removing and installing display unit  
for front information display and operating unit control unit  
-J685-.  
– Release locking lugs -1-.  
– Remove switch module in dash panel -2-.  
Installing  
Install in reverse order of removal, observing the following:  
– The switch module in dash panel must be heard to engage.  
3.8  
Removing and installing operating unit  
for window regulator in driver door  
[EX36]  
The operating unit for window regulator in driver door -EX36-  
will henceforth be referred to as “window regulator operating  
unit”.  
3. Controls  
133  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!