ID.4 2021 ➤
Electrical system - Edition 02.2021
– Unscrew bolts -1-.
– Remove electronics box -3-.
Installing
Install in reverse order of removal, observing the following:
Tightening torques
♦ ⇒ a2.5 nd installing fuse holder B [SB]”, page 154
2.4
Removing and installing fuse holder A
[SA]
The fuse holder A -SA- will henceforth be referred to as “fuse
holder A”.
Removing
– Remove anti-vibration brace ⇒ General body repairs, exteri‐
or; Rep. gr. 50; Lock carrier; Removing and installing anti-vi‐
bration brace.
– Disconnect battery ⇒ Rep. gr. 27; Disconnecting and con‐
necting battery A.
– Release retaining lugs -arrows-.
– Remove cover -1-.
152
Rep. gr.97 - Wiring
ID.4 2021 ➤
Electrical system - Edition 02.2021
NOTICE
Danger of connectors being inserted in incorrect position.
– Refer to the applicable current flow diagram to obtain infor‐
mation on the exact pin assignment.
– Take photographs of the assignment.
– Mark wires -2-.
– Unscrew nuts of electrical wires -2-.
– Remove electrical wires -2-.
– Remove cable tie from bracket for fuse holder A -3-.
– Unscrew nut of positive cable -4-.
– Remove positive wire -4-.
– Release retaining tabs on bracket for fuse holder A -1- in
direction of -arrow-.
– Remove bracket for fuse holder A -1-.
– Release locking lug -1-.
2. Relay carriers, fuse holders, electronics boxes
153
ID.4 2021 ➤
Electrical system - Edition 02.2021
– Remove fuse holder A -3- in direction of -arrow- from bracket
for fuse holder A -2-.
Installing
Install in reverse order of removal, observing the following:
Tightening torques
♦ ⇒ a2.4 nd installing fuse holder A [SA]”, page 152
2.5
Removing and installing fuse holder B
[SB]
The fuse holder B -SB- will henceforth be referred to as “fuse
holder B”.
Removing
– Disconnect battery ⇒ Rep. gr. 27; Disconnecting and con‐
necting battery A.
– Release retaining lugs -arrow-.
– Remove cover for electronics box -1-.
– Pull off cover for electronics box -1- in direction of -arrow-.
154
Rep. gr.97 - Wiring
2024 VW ID.4 Owner's Manual
