ID.4 2021 ➤
Electrical system - Edition 02.2021
– Remove alarm horn -2- until electrical connector -1- is ac‐
cessible.
– Disconnect electrical connector -1-.
– Remove alarm horn -2-.
Installing
Install in reverse order of removal, observing the following:
– Tighten new shear nut until head shears off.
Tightening torques
♦ ⇒ Rep. gr. 96; Assembly overview – interior monitor
4.3
Removing and installing anti-theft
alarm sensor [G578]
The anti-theft alarm sensor -G578- will henceforth be referred to
as “anti-theft alarm sensor”.
The front interior light -WX1- will henceforth be referred to as
“front interior light”.
Removing
– Remove front interior light ⇒ Rep. gr. 96; Removing and
installing front interior light [WX1].
– Release retaining tabs -2- in direction of -arrow A-.
– Remove individual sensors -1- from front interior light.
144
Rep. gr.96 - Lights, bulbs, switches - interior
ID.4 2021 ➤
Electrical system - Edition 02.2021
– Release locking lugs -2- in -direction of arrow A-.
– Remove anti-theft alarm sensor -1-.
Installing
Install in reverse order of removal, observing the following:
If the anti-theft alarm sensor has been renewed:
– Configure anti-theft alarm sensor using ⇒ Vehicle diagnostic
tester.
4. Anti-theft alarm system
145
2024 VW ID.4 Owner's Manual
