ID.4 2021 ➤
Electrical system - Edition 02.2021
1 - Front left headlight -MX1-/
front right headlight -MX2-
❑ ⇒ Rep. gr. 94; Remov‐
ing and installing head‐
light
❑ ⇒ Rep. gr. 94; Adjust‐
ing headlights
2 - Bolt
❑ qty. 2
❑ 1.5 Nm
3 - Upper retaining tab
❑ ⇒ Rep. gr. 94; Installing
repair kit for headlight
housing
4 - Bolt
❑ qty. 2
❑ 1.5 Nm
5 - Inner retaining tab
❑ ⇒ Rep. gr. 94; Installing
repair kit for headlight
housing
6 - Rear retaining tab
❑ ⇒ Rep. gr. 94; Installing
repair kit for headlight
housing
7 - Bolt
❑ qty. 2
❑ 1.5 Nm
8 - Front retaining tab
❑ ⇒ Rep. gr. 94; Installing
repair kit for headlight
housing
9 - Bolt
❑ qty. 2
❑ 1.5 Nm
10 - Outer retaining tab
❑ ⇒ Rep. gr. 94; Installing repair kit for headlight housing
11 - Speed nut
❑ M 6
12 - Bolt
❑ qty. 2
❑ 1.5 Nm
2.3
Assembly overview – LED module for daytime running light
The overview is shown for the left side of vehicle as an exam‐
ple.
2. Headlights
61
ID.4 2021 ➤
Electrical system - Edition 02.2021
1 - Left LED module for
daytime running lights -L377-/
right LED module for daytime
running lights -L378-
❑ ⇒ a2.14 nd installing
LED module for day‐
time running lights
[L377]/[L378]”, page
79
2 - Bolt
❑ qty. 3
❑ 2.5 Nm
2.4
Removing and installing headlight
The control unit 2 for break-in protection -J1192- and control
unit 3 for break-in protection -J1193- will henceforth be referred
to as “control unit for break-in protection”.
The front left headlight -MX1- and front right headlight -MX2-
will henceforth be referred to as “headlight”.
Removing
– Remove bumper cover ⇒ General body repairs, exterior;
Rep. gr. 63; Front bumper; Removing and installing bumper
cover.
– Remove bracket for control unit for break-in protection ⇒
o8.3 verview – control unit for break-in protection”, page
99 .
For headlight on driver side
– Pull Bowden cable coupling off headlight ⇒ General body re‐
pairs, exterior; Rep. gr. 55; Bonnet; Removing and installing
Bowden cable.
62
Rep. gr.94 - Lights, bulbs, switches - exterior
2024 VW ID.4 Owner's Manual
