ID.4 2021 ➤
Electrical system - Edition 02.2021
1 - Cover for electronics box
2 - Fuse holder B -SB-
❑ ⇒ a2.5 nd installing
fuse holder B [SB]”,
page 154
3 - Nut
❑ 9 Nm
4 - Bolt
❑ qty. 2
❑ 8 Nm
5 - E-box
❑ ⇒ Rep. gr. 97; Remov‐
ing and installing elec‐
tronics box
6 - Cover for electronics box
7 - Nut
❑ 8 Nm
8 - Protective cap
9 - Electrical wire
2.3
Removing and installing electronics
box
Removing
– Remove fuse holder B -SB-, and lay it aside with electrical
wires connected ⇒ a2.5 nd installing fuse holder B [SB]”,
page 154 .
– Unscrew nut -2-.
2. Relay carriers, fuse holders, electronics boxes
151
ID.4 2021 ➤
Electrical system - Edition 02.2021
– Unscrew bolts -1-.
– Remove electronics box -3-.
Installing
Install in reverse order of removal, observing the following:
Tightening torques
♦ ⇒ a2.5 nd installing fuse holder B [SB]”, page 154
2.4
Removing and installing fuse holder A
[SA]
The fuse holder A -SA- will henceforth be referred to as “fuse
holder A”.
Removing
– Remove anti-vibration brace ⇒ General body repairs, exteri‐
or; Rep. gr. 50; Lock carrier; Removing and installing anti-vi‐
bration brace.
– Disconnect battery ⇒ Rep. gr. 27; Disconnecting and con‐
necting battery A.
– Release retaining lugs -arrows-.
– Remove cover -1-.
152
Rep. gr.97 - Wiring
2024 VW ID.4 Owner's Manual
