ID.4 2021 ➤
Electrical system - Edition 02.2021
– Remove tail light cluster -1- enough to allow access to elec‐
trical connector.
– Disconnect electrical connector.
– Remove tail light cluster -1-.
Installing
Install in reverse order of removal, observing the following:
Tightening torques
♦ ⇒ Rep. gr. 94; Assembly overview – tail lights in body
4.5
Removing and installing rear fog light
[X3]
The rear fog light -X3- will henceforth be referred to as “rear fog
light”.
Removal and installation are described for the left vehicle side
as an example.
Removing
– Remove bumper cover ⇒ General body repairs, exterior;
Rep. gr. 63; Rear bumper; Removing and installing bumper
cover.
– Disconnect electrical connector -3-.
– Release retaining clips -2- in direction of -arrow A-.
– Remove rear fog light -1-.
4. Tail lights
89
ID.4 2021 ➤
Electrical system - Edition 02.2021
Installing
Install in reverse order of removal, observing the following:
– The rear fog light must engage audibly.
Tightening torques
♦ ⇒ General body repairs, exterior; Rep. gr. 63; Rear bumper;
Assembly overview – rear bumper
90
Rep. gr.94 - Lights, bulbs, switches - exterior
2024 VW ID.4 Owner's Manual
