ID.4 2021 ➤
Electrical system - Edition 02.2021
NOTICE
Risk of destroying headlight due to ingress of water.
– Check seal between output module and headlight for dam‐
age.
– Make sure seal is properly seated.
– Check headlight settings and adjust headlights if necessary
⇒ Maintenance; Booklet 53.1; Descriptions of work.
Tightening torques
♦ ⇒ Rep. gr. 94; Assembly overview – headlight
2.13
Removing and installing light conduc‐
tor for contour lighting in radiator grille
[L362]/[L363]
The light conductor for contour lighting in radiator grille, front left
-L363-/light conductor for contour lighting in radiator grille, front
right -L362- will henceforth be referred to as “light conductor”.
Removing
– Remove badge at front ⇒ General body repairs, exterior;
Rep. gr. 66; Lettering and badges; Removing and installing
badges at front.
– Disconnect electrical connector -2-.
– Release retaining clips -3- in direction of -arrow A-.
– Pull out light conductor -1-.
Installing
Install in reverse order of removal, observing the following:
– The light conductor must be heard to engage.
2.14
Removing and installing LED module
for daytime running lights [L377]/[L378]
Special tools and workshop equipment required
♦ Torque screwdriver -V.A.G 1624-
2. Headlights
79
2024 VW ID.4 Owner's Manual
