Table of Contents > Controls > Removing and installing rear window regulator [E711]/[E713]

VW ID.4 Electrical System ➜ Removing and installing rear window regulator [E711]/[E713]

ID.4 2021 ➤  
Electrical system - Edition 02.2021  
Installing  
Install in reverse order of removal, observing the following:  
– The rear lid remote release button must be heard to engage.  
3.11  
Removing and installing rear window  
regulator [E711]/[E713]  
The rear driver side window regulator button -E711-/rear pas‐  
senger side window regulator button -E713- will henceforth be  
referred to as “window regulator button”.  
Removal and installation are described for the left vehicle side  
as an example.  
Removing  
– Remove button trim ⇒ General body repairs, interior; Rep.  
gr. 70; Rear door trims; Removing and installing button trim.  
– Release fasteners -2-.  
– Remove window regulator button -1- in direction of -arrow-.  
Installing  
Install in reverse order of removal, observing the following:  
– The window regulator button must be heard to engage.  
3.12  
Removing and installing starter button  
[E378]  
The starter button -E378- will henceforth be referred to as “start‐  
er button”.  
Removing  
– Remove lower steering column trim ⇒ General body repairs,  
interior; Rep. gr. 68; Compartments/covers; Removing and  
installing lower steering column trim.  
– Press together retaining clips -2-.  
136  
Rep. gr.96 - Lights, bulbs, switches - interior  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!