Table of Contents > Windscreen washer system > Adjusting spray jets

VW ID.4 Electrical System ➜ Adjusting spray jets

ID.4 2021 ➤  
Electrical system - Edition 02.2021  
– Release securing clip -1- in direction of -arrow-.  
– Pull off washer fluid hose connection -2-.  
– Disconnect electrical connector -4-.  
– Remove spray jet -3-.  
Installing  
Install in reverse order of removal, observing the following:  
NOTICE  
Leaks from connection for washer fluid hose.  
– When connecting washer fluid hose, securing clip must  
engage audibly in connection for washer fluid hose.  
– Starting at the top, push spray jet into mounting hole in  
bonnet until spray jet is heard to engage.  
– ⇒ Rep. gr. 92; Adjust spray jets.  
3.5  
Adjusting spray jets  
– Adjust spray jets ⇒ Maintenance; Booklet 53.1; Descriptions  
of work.  
44  
Rep. gr.92 - Windscreen wash/wipe system  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!