Table of Contents > 5 Cleaning contact surfaces > 5.2 Cleaning threaded connections

VW ID.4 Electrical System ➜ 5.2 Cleaning threaded connections

ID.4 2021 ➤  
Electrical system - Edition 02.2021  
5.2  
Cleaning threaded connections  
Special tools and workshop equipment required  
♦ contact surface cleaning set -VAS 6410-  
NOTICE  
Risk of damage to threaded connections.  
– The use of rust removers, contact sprays or greases is  
prohibited.  
The battery -A- will henceforth be referred to as “battery”.  
The grey sanding pads are suitable for light soiling and soft  
surfaces.  
The red sanding pads are suitable for heavy soiling and hard  
surfaces.  
Removing  
– Disconnect battery ⇒ Rep. gr. 27; Disconnecting and con‐  
necting battery.  
– Unscrew cable lug of respective threaded connection -1-.  
– Fit adapter -A- from contact surface cleaning set -VAS 6410-  
onto threaded connection -1-, and rotate it back and forth  
-arrows- to grind off corrosion and soiling.  
5.3  
Cleaning battery clamp and battery ter‐  
minal  
Special tools and workshop equipment required  
♦ contact surface cleaning set -VAS 6410-  
182  
Rep. gr.97 - Wiring  

Need help?

If after viewing the owner's manual or service manual you still have some unresolved questions about the car VW ID.4 you can write to us using the link below, describing your problem in detail, we try to answer all questions.


Ask your question on the page - Support!