ID.4 2021 ➤
Electrical system - Edition 02.2021
1 - Centre tail light cluster -
MX13-
❑ ⇒ Rep. gr. 94; Remov‐
ing and installing cen‐
tre rear tail light cluster
[MX13]
2 - Nut
❑ qty. 4
❑ 4 Nm
4.3
Removing and installing centre rear tail
light cluster [MX13]
The centre tail light cluster -MX13- will henceforth be referred to
as “centre tail light cluster”.
Removing
– Lever off caps -1- using commercially available plastic
wedge.
4. Tail lights
87
ID.4 2021 ➤
Electrical system - Edition 02.2021
– Disconnect electrical connectors -3-.
– Unscrew nuts -2-.
– Remove centre tail light cluster -1-.
Installing
Install in reverse order of removal, observing the following:
Tightening torques
♦ ⇒ Rep. gr. 94; Assembly overview – tail lights in rear lid
4.4
Removing and installing tail light clus‐
ter [MX3]/[MX4]
The left tail light cluster -MX3- and right tail light cluster -MX4-
will henceforth be referred to as “right tail light cluster”.
Removal and installation are described for the left vehicle side
as an example.
Removing
– Use a commercially available plastic wedge to release tail
light cluster cover -1- in direction of -arrow- from bottom
towards top.
– Remove tail light cluster cover -1- towards rear.
– Unscrew bolts -2-.
88
Rep. gr.94 - Lights, bulbs, switches - exterior
2024 VW ID.4 Owner's Manual
