ID.4 2021 ➤
Electrical system - Edition 02.2021
NOTICE
Danger of connectors being inserted in incorrect position.
– Refer to the applicable current flow diagram to obtain infor‐
mation on the exact pin assignment.
– Take photographs of the assignment of the electrical wires
and fuses.
– Disconnect electrical wiring.
– Remove fuse holder B.
Installing
Install in reverse order of removal, observing the following:
Tightening torques
♦ ⇒ a2.5 nd installing fuse holder B [SB]”, page 154
2.6
Removing and installing fuse holder C
[SC]
2.6.1
Removing and installing fuse holder C
[SC], left-hand drive vehicles
The fuse holder C -SC- will henceforth be referred to as “fuse
holder C”.
Removing
– Disconnect battery ⇒ Rep. gr. 27; Disconnecting and con‐
necting battery A.
– Remove dash panel ⇒ General body repairs, interior; Rep.
gr. 70; Dash panel; Removing and installing dash panel.
– Release locking lugs -2- in direction of -arrow A-.
– Remove fuse holder C -1- until electrical wires are accessi‐
ble.
156
Rep. gr.97 - Wiring
ID.4 2021 ➤
Electrical system - Edition 02.2021
NOTICE
Danger of connectors being inserted in incorrect position.
– Refer to the applicable current flow diagram to obtain infor‐
mation on the exact pin assignment.
– Take photographs of the assignment of the electrical wires
and fuses.
– Disconnect electrical wiring.
– Remove fuse holder C.
Installing
Install in reverse order of removal.
2.6.2
Removing and installing fuse holder C
[SC], right-hand drive vehicles
The fuse holder C -SC- will henceforth be referred to as “fuse
holder C”.
Removing
– Disconnect battery ⇒ Rep. gr. 27; Disconnecting and con‐
necting battery.
– Remove dash panel cover on front passenger side ⇒ Gener‐
al body repairs, interior; Rep. gr. 68; Compartments/covers;
Removing and installing dash panel cover on front passen‐
ger side.
– Release locking lugs -2- in direction of -arrow A-.
– Remove fuse holder C -1- until electrical wires are accessi‐
ble.
NOTICE
Danger of connectors being inserted in incorrect position.
– Refer to the applicable current flow diagram to obtain infor‐
mation on the exact pin assignment.
– Take photographs of the assignment of the electrical wires
and fuses.
– Disconnect electrical wiring.
2. Relay carriers, fuse holders, electronics boxes
157
ID.4 2021 ➤
Electrical system - Edition 02.2021
– Remove fuse holder C.
Installing
Install in reverse order of removal.
2.7
Removing and installing bracket for
fuse holder C [SC]
2.7.1
Removing and installing bracket for
fuse holder C [SC], left-hand drive ve‐
hicles
The fuse holder C -SC- will henceforth be referred to as “fuse
holder C”.
Removing
– Remove fuse holder C, and lay it aside with lines connected
⇒ a2.6.1 nd installing fuse holder C [SC], left-hand drive
vehicles”, page 156 .
– Cut through cable tie on bracket for fuse holder C -2-.
– Release locking lugs -1-.
– Remove bracket for fuse holder C-2- in direction of
-arrow A-.
Installing
Install in reverse order of removal.
2.7.2
Removing and installing bracket for
fuse holder C [SC], right-hand drive ve‐
hicles
The fuse holder C -SC- will henceforth be referred to as “fuse
holder C”.
Removing
– Remove fuse holder C, and lay it aside with lines connected
⇒ Rep. gr. 97; Removing and installing fuse holder C [SC].
– Cut through cable tie on bracket for fuse holder C -2-.
158
Rep. gr.97 - Wiring
2024 VW ID.4 Owner's Manual
