ID.4 2021 ➤
Electrical system - Edition 02.2021
NOTICE
Risk of damage to component surfaces.
– Before using a lever, always mask off the components
installed in visible areas using commercially available ad‐
hesive tape.
– Use a commercially available plastic wedge to lever out illu‐
minated vanity mirror -1- at recess -arrow-.
– Disconnect electrical connector.
Installing
Install in reverse order of removal.
2.12
Removing and installing dynamic light
strip 1 for information in dash panel
[L385]
Special tools and workshop equipment required
♦ hook -T10538-
The dynamic light strip 1 for information in dash panel -L385-
will henceforth be referred to as “dynamic light strip”.
Removing
– Remove A-pillar trims ⇒ General body repairs, interior; Rep.
gr. 70; Trims, interior; Removing and installing A-pillar trim.
– Remove cover for dash panel/head-up display ⇒ General
body repairs, interior; Rep. gr. 70; Dash panel; Removing
and installing cover for dash panel/head-up display.
– Use hook -T10538--A- to unhook dynamic light strip -1- on
left side in direction of -arrow-.
124
Rep. gr.96 - Lights, bulbs, switches - interior
ID.4 2021 ➤
Electrical system - Edition 02.2021
– Secure dynamic light strip -1- to prevent it from engaging
again.
– Use hook -T10538--A- to unhook dynamic light strip -1- on
right side in direction of -arrow-.
– Disconnect electrical connector.
– Remove dynamic light strip -1-.
Installing
Install in reverse order of removal, observing the following:
– The dynamic light strip must be heard to engage.
2.13
Removing and installing light 1 for
front centre console background light‐
ing [L193]
The light 1 for centre console background lighting -L193- will
henceforth be referred to as “centre console background light‐
ing”.
Removing
– Remove centre console insert ⇒ General body repairs, inte‐
rior; Rep. gr. 68; Centre console; Removing and installing
centre console insert.
– Release locking lugs -3-.
2. Lights
125
2024 VW ID.4 Owner's Manual
