ID.4 2021 ➤
Electrical system - Edition 02.2021
– Remove starter button -1-.
Installing
Install in reverse order of removal, observing the following:
– The starter button must be heard to engage.
3.13
Removing and installing electric hinged
tow coupling attachment button [E474]
The electric hinged tow coupling attachment button -E474- will
henceforth be referred to as “electric hinged tow coupling at‐
tachment button”.
Removing
– Detach luggage compartment side trim in area of electric
hinged tow coupling attachment button ⇒ General body re‐
pairs, interior; Rep. gr. 70; Luggage compartment trims; Re‐
moving and installing luggage compartment side trim.
– Disconnect electrical connector -3-.
– Release locking lugs -2-.
3. Controls
137
ID.4 2021 ➤
Electrical system - Edition 02.2021
– Remove electric hinged tow coupling attachment button -1-.
Installing
Install in reverse order of removal, observing the following:
– The electric hinged tow coupling attachment button must be
heard to engage.
3.14
Removing and installing rear lid clo‐
sure button [E574]
The rear lid closure button -E574- will henceforth be referred to
as “rear lid closure button”.
Removing
– Using commercially available plastic wedge, pry out rear lid
closure button -1- in direction of -arrow-.
– Remove rear lid closure button -1- until electrical connector
is accessible.
– Disconnect electrical connector.
– Remove rear lid closure button -1-.
Installing
Install in reverse order of removal, observing the following:
– The rear lid closure button must be heard to engage.
3.15
Removing and installing rear lid warn‐
ing buzzer [H32]
Removing
– Remove lower rear lid trim ⇒ General body repairs, interior;
Rep. gr. 70; Luggage compartment trims; Removing and
installing lower rear lid trim.
– Pull out spreader rivets -1-.
138
Rep. gr.96 - Lights, bulbs, switches - interior